Self-leveling floors - the concept , advantages and disadvantages

How do self-leveling floor with their hands - step by step instructions

whether and how to make self-leveling floor with their hands?Normally this question is raised by hearing the material cost + cost of works on its installation.In fact, you may well do in the home, saving on masters services.It will help you with this step by step guide and thematic video.

1. Substrate Preparation.You need to remove the old flooring, baseboards.If the floor is wooden and painted, have to use metal brushes, scrapers and spatulas.Clean the surface of the glue, grease, paint and debris.Pay special attention to cracks.This usually they extend slightly, for example by means of sandpaper.Upon completion of work, remove all dust.The easiest way to do that with the construction of the vacuum cleaner.
2. Removing chips, cracks and irregularities.Use cement mortar, mastic or adhesive mixture.If too many defects, have to do a device of cement covering the entire surface of the base.
3. Gender polished, cleaned of dust, and primed.This will improve the quality of the adhesion of the polymer layer to the substrate.Apply the primer layer is usually 2 in a roller or wide brush.Please note: the larger the size of the pores have a surface is prepared, the more viscous is to be part of.
4. device expansion joints.By this stage should be approached only after the complete drying of the last layer of primer.On the perimeter of the room glued foam tape deformation.It will ensure that the temperature and shrinkage joint between the polymer layer and the walls.It is necessary to avoid irregularities and distortions, when the floor is deformed by heat, vibrations or movements of the house.This is normal!
5. Preparation of self-leveling floor mortar.Here you can only use the attached instructions to the dry mixture.It must be indicated proportions rehydration.For mixing the ingredients suitable electric drill with a special nozzle.Each kneading should be kept the same consistency!
6. Fill base.The resulting solution was poured onto the cleaned surface, and on which spreads.At this point, you need to help him distribute evenly.To do this, use a special tool - a squeegee.Have him put the adjustable gap allows the composition of the desired thickness.
7. composition distribution is carried out away from the wall opposite the door.He pours stripes, gently and without splashing.The time between filling portions should not exceed 10 minutes.
8. poured layer should be rolled pinion to oust him from the air bubbles.
9. A day later, this layer may be coated with polyurethane varnish, which will give a glossy shine of the floor surface.

Outcome: Self-leveling floors are made with their own hands is not worse than the masters hands.However, if you want to make them decorative, for example, 3D, it is better to turn to professionals.They know the intricacies of how to pour the self-leveling floor with photo-pattern or a pattern of quartz sand, acrylic, "chips", and so on. D. You will only enjoy the results.