Decor stucco walls with his own hands - a design fully power all

it sets out the repair in your own apartment, many dreammaximize savings on the purchase of building materials without compromising quality finishes.Are there any options?Of course, if you try to perform a decor plaster walls with his own hands, it is easy to create an original invoice, which will look like an expensive mural.You do not need to master complex building technologies.It is enough to stock up on the necessary tools to study and follow the steps in detail.

What are the advantages of decorative plaster?

choosing as usual finishing putty, a little over worked topcoat, it is easy to get in the end an interesting texture, difficult terrain.We are raising the bar, making the interior of the future more expensive and respectable.Plaster falls easily on any basis: on drywall, brick, foam concrete.The material is very ductile and work with it is convenient even for a beginner.

The composition of modern blends used plasticizers, additives that improve the properties of the encircling material.He easily as oil falls on the wall, and it becomes very pliable plastic base on which to continue working.That is why the decoration of the walls with his own hands is a great pleasure.

The result is a finish that lasts a long time without losing its attractive qualities.She is not afraid of moisture, direct sunlight and mechanical strength.If performing wall decor putty with their own hands, to observe all technological processes, durability finish can easily compete with the stone or tile.This is another advantage of the described finishing.

putty does not absorb odors, for it can be easily maintained with the help of it is not difficult to improve the thermal and acoustic insulation.It is composed of non-toxic elements, in fact, this is the most environmentally friendly coating on the date that the operation does not emit harmful toxic substances.

https: //

How can I perform a decorative plaster with your hands?

story of how from the usual decorative plaster putty do not take much time.Before you get started, you need to stock up on the following instruments:

1. Set of different spatulas.
2. Grater and trowel trowel.
3. trowel.
4. Building level.
5. Plummet.

manufacture of decorative plaster with your hands Technology from the usual filler consists of the following stages:

• Preparing walls.
• Create base layer.
• Getting textured coating in different ways.
• final stage.

Preparing walls for plastering

Apply putty can only be well-cleaned walls.You must first get rid of the wallpaper from any other topcoat, wall surface thoroughly inspected, cracks and crevices are colored, and then filled with the same plaster.Building level checked evenness of the base.For this exhibit, and generally inspected for detection of characteristic deviations.Filled hollow thicker layer thus aligned wall.Then, the plaster dries.The last thing you need to do at a preliminary stage - to produce a primer.

Creating a basic decorative layer

Anyone who does not know how to do the usual decorative plaster can watch instructional videos or carefully read the following instructions.Take the ready-mixed and diluted with water according to the instructions given on the package.Breeding must be as much as will be possible to put on the wall at a time.Despite the fact that modern manufacturers add in a mixture of additives that slow down the process of hardening, ordinary plaster hardens quickly.The main task - to create the required layer thickness, and immediately proceed to further decoration.

Note!The layer thickness is selected considering the fact that the height of the billing amount generated 1-1.5 mm.Test the application of the base layer and allow to train your hands to feel how to create a decorative plaster putty from the usual, given the video below shows how it can be done.

Getting textured wall coverings

Get textured coating can be in different ways:

• When using a roller.
• ready-made stencils.
• Brushes, trowel, notched trowel.

Widget from SocialMart

How does this happen?Using the roller - the easiest way to create a texture similar to velvet disheveled.Too "fluffy" is not difficult to lubricate the spatula.He smoothed plaster, removes too sharp protrusions.Layer roller is traversed along the entire length once.So we get a clear picture.

specialized in DIY stores sell ready-made stencils, using them very easy to get from the usual decorative plaster putty construction, the photo shows how the pattern is transferred.On the working surface of the stencil has a raised pattern.He, pressing the soft foundation, it leaves a nice imprint.To each time the wall was obtained a clear stamp sole stencil must be constantly washed with water.It takes a lot of time.And this is the only disadvantage of this method.

Note!For printing on the ground near the corners, there are special stencils are made of soft rubber.

If no tools described above on hand and you can not create a decorative plaster putty from the usual roller or stencil, the course can be sent any brush or spatula work.With these easy to create a texture similar to concrete, natural stone, suede.Picking up the trowel and a little more press it into a soft base, experienced designers get horizontal or vertical stripes.Even an ordinary plastic bag or a bath sponge in the hands of an experienced master is transformed into an effective tool that can create the desired result.Beginners just need to be trained to use them, and then with his own hands to try to create an original finish.

https: //

final stage of plastering

After applying the plaster should be dry well.Typically, it can take hours.Then, the surface is treated with sandpaper with fine sandpaper.To emphasize the texture of the walls helps double staining.Please pass on her long-haired roller, and then, after drying layer, roll with a short layer and paint on the tone is lighter core.Finishing coat - clearcoat.All decorative plaster is ready for use.

Stain decorative plaster one layer and one color does not make sense, the texture is lost quickly.To the efforts were not in vain, and the pattern is clearly entered two colors must be used when painting.So first roller with a long nap painted wall painted a dark tone.One day, when the first coat of paint is dry, paint the walls again roll with medium length bristles paint a few shades lighter than the foundation.

If the roller is not present, you can use a wide flat brush.We operate as follows:

1. Pick up a tray and pour it in the paint.Brush dipped in it completely, and then removed the excess paint on the edge of the bath, and that the brush wipes on a piece of thick cardboard.
2. Now you can light sweeping movements to put the paint on the wall.It is important to paint a textured plaster across the parallel vertical surfaces, barely touching the wall brush.Paint with a brush is not rubbed and slightly greasy on the convex part.
3. Simplify the process as possible, using the method of blur.On the wall, in this case applied to a dark layer, and then, until it has dried, the top layer is wiped with a wet cloth.As a result of deepening should remain dark, and texture (pile) light.

to paint stayed longer necessary to protect the paint finish.It uses a water-based varnish.For it is well penetrated into the base of plaster, paint diluted with water in proportions of 1x1.The solution is applied to the wall of a wide brush in two layers.The second layer is applied after the first has dried.In the video you can see how it looks, and that in the end should turn out.

https: //

https: //

https: //

https: //