Video how to install interior doors and self- correct

First we need to dismantle the old door and the opening clear of debris (old cement, etc.).Then going to a new door frame.Vertical racks are measured by height and saw off using a miter box for the desired size, and the horizontal strap comes in the size of the door leaf.Files must be treated friction surfaces.To secure the box in the corner joint screwed screws.Place in the loop is marked at the place of hinges on the door leaf.Horizontal rack applied to the door so that between the door and the horizontal bar of the box was a 3 mm gap.When you want to install interior doors entrance or severe, it is necessary to hang the door on the three loops, and the interior into two.Checking the verticality of the walls of the doorway and set assembled box.Wood wedges fixed box interior door shall be verified and the level of its verticality.Vertical rack attached to the wall with large screws with dowels.The remaining hole is closed with special caps.

Widget from SocialMart

done by counting the loops on the door leaf.Above and below, it measures 200 mm, apply the loop and lead round a pencil.Place in the loop vydalbyvaetsya using a chisel and hammer.All exposed surfaces (for hinges and lock) must be treated with varnish.In places for screws are drilled hole and then screwed hinges.Thereafter make markings in place on the lock installation depth and width.The lock is generally set at a height of 800 mm to 1100 mm from the bottom edge of the door.With the help of the cutter to mill hole for the lock.If the hole is drilled, it is better not to do it with one, and alternately on both sides.After proper lock installation, interior doors can be installed.Produce hanging the door leaf on hinges.

component foam is necessary to fill the space between the frame and the wall.The foam has the ability to greatly expand and thus create pressure.Therefore, the door frame reinforcing struts.Foam dries from 4 hours to days, depending on composition.

The final step is the installation of casings.They close the gap between the frame and the wall.Plat strictly cut away at 45 degrees.To box nailed small nails with the flattened hats or no hats.The distance between nails should be 100 mm - 150 mm.

Video how to install the door yourself

Specialists "Superstroy" show the whole process of how to install interior doors with their hands and performing tapping lock.

Now you can easily and cost-effectively install interior doors yourself on video instructions.Stay on our site - repair of apartments on its own, and the repair will be carried out correctly.

Author Kurochkin Svetlana