Acrylic Primer : an invisible helper in the repair

acrylic primer for walls and ceilings

acrylic primer can be considered the most environmentally friendly.Due to its composition of water-based it creates the thinnest elastic film, which is perfectly breathable and allows moisture, but it reduces the absorption of liquid processed materials.Especially this is evident in the use of priming of concrete blocks and other relatively brittle and friable materials - their life is significantly increased.

acrylic primer can have a different set of properties depending on its tasks, but part of it always includes the following main components:

• water base;
• binders (linseed oil, resin);
• pigments;
• drying the catalyst (on its amount in the composition depends on the drying rate);
• additional components (chalk, marble microparticles, mica);
• specialized additives conferring special properties (defoamer, biocide, ethylene glycol, etc.).

For each specific task has its own kind of acrylic primer:

• adhesive enhances grip base (wall) with wallpaper, paint or other finishes;this property enrich the composition of quartz impurities;
• universal fit for almost any purpose and surfaces, water-resistant and has a good performance impregnation;
• impregnating aligns durable surface defects;
• special applies only to specified on the package surfaces;
• deep penetration fastens the base material.

acrylic primer uniqueness lies in the fact that it is suitable for almost any surface:

• concrete and brick walls;
• plaster and putty;
• wood and other things.

for facade decoration and other outer surfaces of acrylic primer selected rare.Usually there are more resistant to the external environment formulations.But for the preparation of walls before finishing the interior is the most suitable material.The soil is absorbed into the treated surface of a centimeter or more, allowing you to be confident in the durability of the subsequent finishing.

Through it becomes possible to expose for painting even old brick or concrete walls for the interior in the "loft" style.

acrylic primer deep penetration under the wallpaper

Such preprocessing of walls works wonders with a basis for wallpapering.

If the plaster, putty or other surface rather loose, it can be successfully pasted on them wallpaper and even, perhaps, the first time to enjoy the result.However, very soon show up the shortcomings of such finishing: wallpaper will keep up with the walls (heavy vinyl faster, lighter paper hold on a little longer), the seams may start waking up sand or pieces of putty / plaster ...

But it is pre-treated wall acrylic primer deep penetrationand all of these problems can be avoided.This is due to the almost unique ability to penetrate deep into the composition of the base, fill the cavity and to glue the particles together.Strength and endurance so treated soil wall is increased at times.

Plus after using acrylic primer, you will need much less than wallpaper paste for high-quality and reliable fixation of each web by increasing adhesion.

acrylic primer for wood for painting

Wood - an excellent material for finishing and processing, as if she needed a primer?

The answer is simple: acrylic primer for wood will allow much better protect the foundation from external factors.In addition, it will greatly save the paint, stain or varnish used for finishing wood products.

Note!For best results the primer should be applied evenly.Do not rush to put finishing - you may need two soil layers.

acrylic primer for wood for painting creates a dense and elastic white film with high adhesive performance on the wood surface.Finish after such treatment falls even layer, and does not spread.Moreover, with translucent varnishes and stains so you can even adjust the color intensity.

Another important point to be aware of the primer for wood: it reduces the absorption of paint timber, so it will require a lot less.

Acrylic Primer: spray, roller or brush?

release form acrylic primers varies, mainly depending on their scope.For the majority of the finished surfaces is a classic composition when the liquid primer can be purchased in packages of 2 to 10 kg.Exceptions are substantially coats on metal and plastic, which are produced in the form of aerosols and are frequently used for repair of automobiles and other articles of complex shape.

In all other cases, the use of large flat areas cushion (it allows economically, quickly and evenly cover their composition), and on the corners and embossed surfaces, use a brush.