Paint for paving slabs - madness or practicality ?

worth painting or not?

To begin with we shall understand, whether it is possible to paint paving tiles.Yes, it can be painted to prolong the life, as it creates a layer on the surface, which protects it from all the aggressive external factors.Used for this alkyd, polyurethane and rubber paint, which make the surface less slippery and prevent its erasure and destruction.

However, despite the possibility to perform this procedure, it is still recommended to buy colored tile.When its production is added to the dye for paving slabs, that allows you to get any color.In turn, this eliminates the need to do the painting.But, if you do for some reason, we decided to do it, then you need to know a lot of nuances.

Experts recommend the use of rubber compositions.This is due to their advantages:

• elasticity;
• Fire;
• Water- and weather;
• resistance to wear.

coating rubber non-slip, helping to avoid injuries, especially in the cold season and in the rain.The basis of such compounds are acrylic polymers that provide durability even under severe mechanical stress.Also, the protective layer protects the tiles from moisture and temperature changes.

Paint for paving slabs: how to apply?

Consider how to paint paving tiles.The first step is preparing the surface.To this end, swept away all the dirt and sand with a brush or vacuum cleaner.After that, the whole pavement moistened with water from a garden hose and allowed to give it to dry.For best results, you can use the washing machine, which is a powerful water pressure to clean the surface.But, using this machine, you need to know how to use it so as not to damage the individual tiles.

Tip!The use of the washing machine for pavement can be carried out consultation with the seller in the cabin rent or purchase the equipment.

During coloring composition should be regularly stirred.The first coat of paint is recommended to dilute 20% mineral turpentine.However, you should read the manual use of the formulation in order to properly apply it.The addition of turpentine increase the adhesion of the first layer to the sidewalk.Diluting it should be in a separate bucket or tray.Other layers (two or three, as appropriate) in the full force applied by brush or roller.Between the application of each layer must be allowed to dry them.On dry dates also refer to the manufacturer's packaging.

What you need to know

Painting paving slabs completed.Next, you need to remove all the jars tightly and drips its lid.Immediately after painting Wash all the tools that have been stained with the composition.To do this, use turpentine and washing with water.If not immediately wash the brush and roller, they will be broken, and continue to use them will not succeed.

Before you begin, it is imperative to know what the weather will be the next few days.If the air temperature is below 10 degrees Celsius, it is better to refrain from work.The same should be done if in the next 12 hours rain is forecast.Dispose of all the remnants of paint and turpentine must be in the appropriate manner, and in any case do not pour them down the drain or sink.

Tip!It is better to start work when the next 48 hours are planned reduction in rainfall or temperature, it will harden the paint well.