Build Daily

Engineering Systems

August 12, 2017 18:08

Standard instructions on how to take readings from the electricity meter

click fraud protection

standard instructions on how to take readings from the electricity meter

There is nothing easier than to take readings from the meter.To keep a record of data on the use of electricity in the room, follow the following instructions:

  1. Sign a not a big notebook in which each month (its last number), you will record the new reading.
  2. Memorize the number before the decimal point.If the last digit is not allocated in a different color and is not separated, so the counter shows the whole kilowatt hours.

to transmit information in Energosbyt enough to provide indications as described in paragraph 2. However, if during the year you do not provide a monthly report and pay for electricity alone, then you should be able to calculate the amount of electricity used, based on the data for the previous month.Place your example:
May, data for the last month up 35522 kilowatt-hours, while the current reading is 35598.7.Remembering school, we rounded to the decimal point and eight counts: 35599-35522 = 00077 kWh.This number is multiplied by the specified rate.That will have the amount that must be paid.


bit of a different situation when the meter five-digit data will change as follows:
let readings for the last month up 99 540 kW / h, and the current 00033. In this case, proceed as follows: 100033-99540 = 493 kW / h.

стандартная-инструкция-как-снимать-показания-с-счетчика-электроэнергии-2

How to take readings with the two-tariff electricity meter?

There is also simple and elementary.At the beginning of the month, enter into your notebook reading the first and second rate.An integer can not write enough to single digits after the decimal point.
At the end of the month, again take the readings.It triggered the above diagram, if you enter data in Energosbyt via the Internet, then simply enter readings from the display counter for each tariff, but in the case of self-control and payment, believe on the familiar principle.

стандартная-инструкция-как-снимать-показания-с-счетчика-электроэнергии-3

  • first rate: From current indications subtract the previous.Multiply that number by the prices of the fare (for example, daily).
  • second rate: From current indications subtract the previous.Multiply that number by the rates of the tariff (eg night).

remains to summarize the findings of the day and night tariff, and you can safely make a payment.

Standard instructions on how to take readings from the electricity meter

instagram viewer