How to remove the ceiling interior lighting cars ?

reasons for removal

main causes of this event may be the following:

• replacement of the affected lens;
• replacing light bulbs with more powerful;
• checking contacts (if the light does not work);
• complete replacement of the lighting unit.

you do not damage the integrity of the anchorages, diffuser, interior trim or light bulb itself, you need to carefully dismantle what we'll talk further.

correct dismantling

Depending on the brand and the car class, removing the courtesy light can perform differently.The reason for this - a different design of the lens mounts.Today, popular items are secured using special flags and spring clips.In the first case, you simply pull the transparent cover on.In the second - with the help of a thin minus screwdriver to pry the lid should be in designated areas (which we have identified in the photo).

draw your attention to the fact that the dismantling must be carried out with extreme caution.much force would be required to remove the lens, so if there is resistance, it means that you do not.It is better to re-view all the joints, possibly opening a screwdriver is hidden somewhere else.

should also be noted that sometimes the cover is removed by itself, and sometimes with the "internal".It depends on the design features of the device.bulb - Once you remove the first obstacle, the new will.Depending on the type of cap lamp can be switched off in different ways: if you press down on the spring or just disconnect the contacts.

Next, remove the ceiling light car interior with their own hands.Usually it is fixed to the casing by several screws (2 to 4) or a mechanical latch.Here it is necessary to be extremely careful, because the body is brought to the wiring of the battery.All you need - to separate the contacts.

Another important tip - to mark the wires themselves, because you have to install the ceiling interior lighting to the original place after the renovations.For this masking tape may be used or a different color marker.

Transparent video guide

To your attention a short video tutorial where you can see all the details of the event:

That's the whole technologyassembly and dismantling operations.As you can see, nothing complicated, the main thing - be very careful and neat.We also recommend you to read the article: how to remove the spot light!