Akvapanel Knauf

Akvapanel Knauf - a modern finishing material.Used for external and internal facing rooms.Due to high rates of water resistance, it can be used in bathroom, kitchen, toilet, that is, rooms with high humidity.

What Akvapanel Knauf?

This finishing material is a rectangular plate in the following sizes:

1. Width 900, 1200 mm;
2. length 1200, 2400, 2800 mm;
3. thickness of 12.5 mm;
4. weight of 8.5 kg / m2 and 16 kg / m2.

produces several types of boards:

1. Akvapanel Outdoor: for exterior cladding;
2. Akvapanel Internal: for the interior lining;
3. Akvapanel Skylight: for use in the construction of indoor and outdoor ceilings;
4. Akvapanel subfloor under tiles: as a basis for laying of tile or natural stone;
5. Akvapanel Klimatshild: to protect the insulation in the exterior walls of the building frame from climatic influences.

Composition

The composition Akvapanel Knauf includes Portland cement, mineral filler and fiberglass mesh.This arrangement allows the plate to withstand considerable load - bearing capacity of up to 50 kg / m2, and, thus, be sufficiently flexible material.

In the article you can see photos and video Akvapanel Knauf.

Specifications Knauf AQUAPANEL

The technical parameters of the material there is a lot of indicators that are characterized by certain terms are not familiar to most people.Therefore, we consider the most important properties of Knauf AQUAPANEL.

1. thermal conductivity from 0.27 to 0.36 W / m * K (depending on the type of plate);
2. Frost.The material withstands 75 cycles or more;
3. density from 1050 to 1350 kg / m3 (depending on the plate type);
4. maximum bending radius of 1 to 3 meters (depending on the type of plate);
5. minimum application temperature - -50 degrees;
6. incombustible material.

Rascmotrim more specifications Akvapanel Knauf all kinds:

Akvapanel Knauf Outdoor

Akvapanel Knauf internal

Akvapanel Knauf skylight

Akvapanel Knauf subfloor under tiles

Akvapanel Knauf Klimatshild

Scope

Akvapanel can be used in the lining of living rooms, production areas, settling basins, baths and outdoor decoration of buildings.Due to the low thermal conductivity of the plate performance for outdoor decoration, in addition, will serve as a good insulation.

During the installation of plates it is necessary to comply with certain technology of stacking - namely, between the plates need to leave a gap of 3-5 mm, which is filled with a special mixture;vertical joints of each row of plates should not coincide with each other, then there must be a bunch.

Benefits

• Easy installation.Akvapanel mounted on the frame of the profiles.In some cases, it can be mounted directly on the wall.
• not require additional preparation for finishing.Any material can be directly applied to the plate.
• In ecology is not inferior to a similar finishing materials.
• Can be operated for decades without losing its properties.
• Good flexibility allows you to work with the material, even in tight spaces or on a custom surface.

Disadvantages

main and perhaps the only drawback Akvapanel Knauf - cost.However, getting such a material, there is no doubt its durability and excellent performance.

Akvapanel Knauf are enough new material in our construction market.But, in the opinion of people who have faced him, note that this high-quality material, with a wide range of applications.It is practically universal, easily installed both indoors and outdoors.

In comparison with similar materials, such as drywall, Knauf AQUAPANEL characteristics will be better, especially with respect to strength.

Video