Shelf for shoes in the hallway

Many who've encountered the same problem as the shoes scattered on all the hall.Particularly, the following picture can be seen in the evening, when all the inhabitants of the apartment come home.The solution of this problem can be shelf in the hallway to shoes.Shelf made with their own hands, not only solve the problem of storage of shoes, but also save money, decorating a hallway.

materials for shoe shelves in the hallway

Shelf for footwear should be functionaland small, as in a small hallway great design is inappropriate.Of the many available materials choose a tree that is convenient in handling, affordable and environmentally friendly.Shelf for shoes, as well as hanging shelves in the hall, is made in a simple manner.For this we need tools such :

• plane;
• Saw;
• screwdriver;
• hammer;
• sanding paper.

Plus instruments will need to acquire such materials :

• 6 bars of wood, sections of which 16 x 40 mm and a length of 220 cm;
• universal screws with a diameter of 3 mm and length of 25 mm;
• screws for wood;
• varnish for wood.

process works

begin working with the side elements to the shelves, so-called side insertions.shelf depth should be 33 cm, which is quite enough for any size shoe.Accordingly, saw off 6 equal pieces by 33 cm. Then on one of the pieces evenly distribute 4 bar and do has washed down to the depth of the bars.For convenient, the width of each shelf 62 do see that each of them fit for 3 pairs of shoes.Each shelf is necessary to saw on the workpiece 4 a predetermined length.Further, in an already sawn penetration bokovinok, ready to insert the workpiece and fasten with screws design.This operation is repeated for each of the shelves.Then with the help of sandpaper should be sanded and rounded upper parts of side insertions.

height of the entire structure will be 80 cm, while the lower shelf will be installed at a height of 25 cm from the floor, in order to have enough space at the bottom for high boots.For the manufacture of racks must bar, wherein the length of 80 cm, and the thickness gash timber depth (16 mm), and to do so at intervals of 25 cm., Leave the top 10 cm for top design.It is necessary to make 4 of the rack and then inserted into the sawn sections ready shelves.Using the same parts and the technology can be made and a wall shelf in the hallway.

From the material that was left, the top manufacture design, which you need to saw the workpiece 2, 33 cm long. The top of already sawn pieces, we clean the sandpaper until a rounding.When all the details of the structure will be ready, they must be processed sandpaper, and if possible, it is best grinder.Already sanded structure must be covered with two layers of varnish.All the details of construction must fasten screws, which need to 4 for each of the screw flanges and 2 for the upper part.By making a few simple steps, a shelf for shoes in the hall ready.

According to this simple method can be done and a corner shelf in the hallway.Below a photo of shelves for shoes hallway.

Photo shelf in the hallway