Ventilation in the bathroom and toilet

ventilation in the bathroom and the toilet is necessary in order to ensure a normal level of humidity.Note that here almost daily used hot water.If enough of the current system of natural ventilation and humidity is increased, it will appear on the walls of the mold.

Check ventilation performance

If it is pressed fully, the ventilation okay.If not, then there are two options.Vent any clogged or simply immured neighbors above.Also you can use to check the lighted candle or a lighter.If all goes well, the flame will be inclined to the lattice.Once the check has been carried out at the open window, should do the same by closing it.So you can determine whether you need to install additional equipment windows for ventilation.Then close the door to the bathroom and do the same manipulation.If the air flow is not necessary in the wall or door to install a small lattice.Note that regardless of the results of testing the combination (combination of natural and mechanical) ventilation of bathroom and toilet is a guarantee that there will always be dry and will not need to make repairs often.

Installation of ventilation in the bathroom

Next - details on how to adjust the ventilation in the bathroom and toilet with his hands in the form of examples photo .To begin, select a suitable fan.To do this, multiply the area of ​​the bathrooms at least 5. To get the value we add 20%.Thus, the required capacity of the fan is defined.It can be operated from the switch (to be included in a time when the lamp is lit).There are also devices that are equipped with a timer.It allows you to adjust the ventilation in combination bathroom optional.

fan should be installed in the hole made for natural ventilation in bathrooms.He should stay in there completely, so before you buy you need to know exactly what all the parameters holes.After that, it is necessary to replace the grating and output wiring of the bathrooms.It can be plugged into one circuit with a switch.If the apartment has malovoltny lamp, the wiring from the fan in the chain must be connected to the transformer.For the ventilation device in the bathroom can be used by the device, equipped with a motor with a timer.His and the wiring must be protected against splashes.

Vent may not be in the bathroom.In this case, it will have to take.For this purpose, there are ventilation ducts.There are several varieties of them:

• Corrugated (there are soft or hard).They should be used, if the distance to the bathroom is small or in difficult cases supply.
• Plastic (is round or flat cross-section).Practically no noise and does not affect the passing air flow.It is easy to mount using special fasteners.

Before you make a hole for ventilation, it is best to consult with professionals.

Video installation of ventilation in the bathroom