Pigsty own hands

Breeding pigs is a lucrative occupation, available to owners of private lands.But the health of the animals depends on the correct construction of a pigsty.Starting with the work should be an accurate plan, which will correctly place and convenient care for animals.Build the right pigsty with his own hands the power of any homeowner.

drawing Development pigsty

There are certain rules according to which animals must be kept.The number of pigs and their target content affect the area allotted for the machine each.

example, a pigsty 2 heads (for boars and sows) and should include a separate unit for the care of the pigs.

therefore need to allocate about 10 square meters for the machine sows and toddlers, a separate machine to 6 square meters for pigs.And to prepare the machine for 8 square meters for boar.

In compiling drawings pigsty must take into account the depth of machine tools from 2.5 to 3 meters.It will be sufficient for the competent animal welfare.In a small number of goals recommended single-row barn with two aisles.And developing a plan for the pigsty on 10 goals, the best solution would be the construction of a double-row structure with three aisles.The width of the corridors should be at least 2 meters.

Step by step instructions on building a pigsty

Under any pigsty need to procure solid foundation.Under it must necessarily be a sand bag, waterproofing of roofing material.

When selecting a location for the unit placement must take into account the evenness of the site and the lack of groundwater: increasing humidity in the building is not allowed.

After pouring the foundation and left standing, you are ready for immediate construction of the walls and roof.The work on this step by step directions:

1. between the base and walls of the waterproofing layer is laid.
2. erect walls (better use of the brick) taking into account the location of the windows along the rows of doors.
3. harvested wood floor ceiling / li & gt.;
4. Held construction of the roof and its covering roofing material / li & gt.;
5. install windows and doors / li & gt.;
6. walls are insulated on the outside (eg, Penoplex), executed exterior design / li & gt.;
7. gables are closed, overlap between the main unit and the attic is insulated.Inside ceiling clapboard / li & gt.;

described guide tells how to make a sty with minimal cost.As a roofing material made use of slate.But the artist is worth remembering that by good quality paving depends on the preservation of heat and optimum conditions of detention pigs.

Create

quality ventilation In order to understand how to build a pigsty with quality ventilation, must take into account the size of the erection.For small rooms is only a couple of large ventilation grilles at the end of the structure and one exhaust shaft.For large areas it is recommended to increase the number of air grilles and exhaust add a couple of mines.

internal arrangement

During construction pigsty with his own hands to take care of gender bias in the direction of the channel through which will be given manure and urine of animals.Therefore, you need to immediately take care of the surface of the filling, taking into account the location of the waste trenches.They should be placed along the machine by the construction of walls (not in the center aisle).

Concrete floor with TV - the best solution for a pigsty because of ease of cleaning and durability.Before filling the surface is to view the accompanying photo and video materials for the correct execution of the task.Use the tree is not recommended: it quickly progniet, and will continue to be damaged by the animals.After harvesting the floor you can begin to build walls.Machines may include separators made of brick or metal grids.

Inside each machine installed feeder (on the opposite side of the channel navozovyvodyaschego).To create favorable conditions for the maintenance of pigs is recommended to complement the wooden flooring blocks and straw, sawdust.

Video pigsty building with their hands