Cage for rabbits with their hands

Trim cage with rabbits can complement any garden or yard.Stylish design will allow all members of the family are easy to care for animals or to engage in their cultivation.Made cage for rabbits with their hands from wood materials, is additionally equipped with a shelf.

frame assembly for a rabbit cage

to both adults and children can comfortably feed the rabbits, the cell will be on a special stand.Additionally, auxiliary regiment made to enable individuals to store feed and hay for the animals.

Therefore, the executor is required to prepare four beams (height 85 cm), which are the main pillars.

These screws are screwed 8 boards (4 in the central part 4 and above), which will serve as fastening elements, the basis for the shelves and cells.At work it is important to measure the smoothness of corners, eliminate distortions construction.

proceed to the instructions on the construction of the base, which will learn how to make a cage for rabbits with an additional branch.Front board in the top of an additional cut.Its truncated part fastened into place with the help of piano hinge, as shown in the photo.It will provide easy access to the inner space of the cell.

required between the bars (on the inside design) tie wide slats to create a solid support (both at the center and top).

on wood boards selected for styling, cut corners, allowing them to fit tightly to the previously attached rack.At this point, the frame will be completely ready.

Assembling the main compartment cells

Quality construction rabbit cells allows for the creation of robust construction, which will have an attractive view.Assembling shaped cells begins with the front part.It will help to understand the peculiarities of its production step by step instructions:

1. going door: connect the frame rails on which it is installed.

to cut the seam on which will be up / down to move the door.

frame itself is made of the door.It is about half of a large box, supplemented shkantami sides.Plant shkantami sawn in earlier slots on the main frame.

2. fasten the side branch of the front.Manufactured side and rear wall of the cell.

3. At an angle cropped roof rails (8 units).

Every two pointed angle staples.Then fixed with screws, the bracket is removed.Screwed to the roof according to the main drawing.

4. Harvested small sheets of plywood that will cover the transition from the roof to the door.They are bolted to the rafters with a mini-self-tapping screws, as shown in the attached chart.

5. Construct a roof: it is closely welded from sheets of plywood the same size, an angle corresponding to the joint angle mini trusses.On the back of the part to be cut off a sheet and set between the base and the cut pieces Piano hinges.It will easily gain access to the animals and to clean the cage.

In front of the two carried the inscription allowing to shorten the central strip and install it on a ledge above a door.

After completion of these works carried boards staining.The above construction of cages for rabbits is quite complex, so the work should be carried out with the use of modern tools.Additionally, it is recommended to study the useful video tutorials.

walls Sheathing, roof

From inside the walls and the door are trimmed mesh.

end walls are installed to the top of the front wall above a door.

to the top of the support frame on the sides are screwed two handles that make it easier portability design.

front board with a hinged part is complemented by bolt.

Another valve is mounted on a door and its frame.

On the front wall above the roof sticks cut from plywood and pre-painted rabbit.

Over the piano hinge on the roof sticks universal tape that protects the metal from moisture.

shingles attached to the roof.

Further skate glued a small piece of shingles (using special glue).

One of the sides is closed plexiglas with a small hole.It will protect the animals against rain and strong blowing cells.On top of the Plexiglas mounted bolt.

collected a small house and ladder for rabbits.All products are painted and installed in the cell.

Contractor can only move it in the garden, prepare the food, hay and animals inhabit.

Photo cells for rabbits

cell construction Videos rabbit with his own hands