Plaster under a fur coat - several ways to beauty

plaster under a fur coat, what is it

known that during the initial spraying of plaster mixtures rough surface is obtained, that is, formed a kind of "jacket", although quite sloppy.Of course, it would be possible to leave and so, but it is much better to create an invoice using special mixtures or by using certain finishing technology.Why?First, you can decide for yourself what kind of grain coat you need, and secondly, this type of trim is a much neater.In other words, under the plaster coat in the decorative design will allow you to get exactly the results you expect, in contrast to the unpredictable rough spraying.

Another argument in favor of a structured decorative finishes can serve as a fact that uniformly roughened layer when the light falls on it, the effect of volume , rather than ragged chiaroscuro.To create the desired effect on the walls just enough spatula and a special roller.And on the ceiling plastered surface roughness to achieve can only be swept roller on the fresh layer, some time later, after applying textured plaster has been completed.

Shuba serving for beauty, not for warmth

Beauty often requires not so much victims as some physical effort to create it.This sculpture, painting and plastering walls.And if in the first two cases, requires talent, then the latter - only a knowledge of the sequence of actions for all possible ways.Incidentally, there are several: mechanical deposition "under coat" imitation fur application by roller, and finally sprayed decorative layer.But, let's be consistent and start with the surface preparation and mixing.As with any other plastering, coat requires a perfect surface of the walls and ceiling.The latter must be particularly reliable, so that the layers do not keep up with him under their own weight.Thoroughly clean all the planes, which will be covered with plaster, mix the solution.

there are other pretty clever solutions Besides ready dry mixes.For example, the coat may well turn out using conventional construction of cement mixed with sand in a ratio of one to three. supplement composition may be some dye to create a color coat .Having consistency oil, causes the composition of the wall.Another option - a little-known, but it is quite affordable.To a mixture of us need regular enamel paint (do not be surprised coat will practically eternal), and putty.The components are mixed one to one, and the depth of the relief texture is directly proportional to the amount of plaster, ie, greater than her, the greater roughness.Ideal exterior decorative plaster.

plaster coat application without too much hassle

With the machine plaster all clear - Charge and guide the mixture onto the prepared surface of the jet ejected from the funnel powerful compressor.Of course, there are some tricks, for example, you should try to spray the solution was strictly perpendicular to the wall, so less splashing.To the smallest details to find out how to apply the plaster coat, a video on this subject it is useful to view.

When plastering is necessary to follow two rules: each following mixture is applied to the line above the previous one, and so that is partially layered on it.Machine method among other things is convenient to put the plaster on the ceiling.

But because special equipment is not at all, it will be easier to operate the old-fashioned way.Take the usual whisk small size and is dipped in the solution.After that, the other hand should take a short stick and holding it at a small distance from the wall, hit on it with a broom.Spray will go to heap, creating a smooth surface roughness.Grain structure depends on the thickness of a broom, stick distances from the treated surface and power punches.Sometimes plastering coat through a fine mesh.Another more convenient way - with a brush.It should be dipped into the solution, after which the bristles rotate up and hold it for a stick or plaque from the wall to itself.Unbent bristles will dot the surface with tiny splashes, creating a fine structure coat.

plaster with the texture of the "coat" for the design of any room, and is an excellent substitute pretty bored with smooth ceilings.However, the main argument in its favor is the excellent results at low cost.