Waterproofing basement TekhnoNIKOL

Waterproofing basement "TechnoNikol" popular with builders through a wide range of waterproofing materials, high quality and technical characteristics, allowing to choose the material for waterproofing of any, even the most complex designs.

basement waterproofing is performed in several ways: kraftliner, of coating, impregnation method and using mounted waterproofing."TechnoNikol" offers all of the above types of waterproofing.

lining hydraulic seals

Okleechnaya waterproofing roll "TechnoNikol" foundation presented several kinds of materials, look at each of them.

1. Technoelast EPG - floating roll material for waterproofing of foundations on the basis of fiberglass or polyester two-way bitumen-polymer layer, the outer side of enhanced fine-grained, interior - plastic film.The material is a biological stability, long-term withstand hydrostatic loads up to 0.2 MPa.Apply Technoelast EPG for the foundations of buildings with the close proximity of groundwater in areas with seasonal shifts soil.Mounting method - vertical or horizontal, by fusing.
2. Technoelast ALPHA - surfaced rolled material from bilateral polyester material reinforced with a layer of foil covering - bitumen polymer plasticizer.Protective coating - a polymer film.It is used for waterproofing foundations, with the possible radiation from rocks of radioactive radon gas soil.
3. Technoelast Barrier Barrier and Light - a rolled material with a self-adhesive layer of polymer film, is used for internal and external waterproofing, including basement waterproofing.Light barrier Technoelast different additional layer of nonwoven material on the outer side of the film, facilitating further finishing.
4. Technoelast BRIDGE - roll waterproofing applied to the horizontal waterproofing of the foundation base, has high strength and resistance to bursting.

Obmazochnaya insulation, mastics and primers

Company "TechnoNikol" except roll waterproofing also produces a wide range of compositions intended for the lubricative and sprayed impregnating waterproofing.Surface waterproofing is carried out using bitumen, polymer and composite cements hot and cold applications.Their main difference - the temperature of the coating solution.Hot mastic difficult to use, but it deeper into the foundation material, filling cracks and capillaries.Cold mastics may be mono- or bicomponent requiring mixing with the activator prior to application.For better adhesion of the waterproofing Primers used with pavement - a primer for bitumen and bitumen-rubber solutions.The most popular compositions for the production of waterproofing "TechnoNikol" are listed below:

1. Mastic "TechnoNikol" №21 - sealant with high strength and water resistance of up to 0.1 MPa, through modifying the rubber additive.Application method - cold, sub-zero temperatures the mastic be heated.Minimum number of layers - two.
2. Mastic "TechnoNikol» №24 MGNT - one-component mastic asphalt with the addition of mineral reinforcing filler, for cold applications.It is applied by brush or roller in several layers.It withstands hydrostatic load of up to 0,001 MPa and is used for waterproofing of the foundation of the capillary moisture.For the coating of porous surfaces must be pre-application primer.The solvent - white spirit.
3. Varnish bitumen "TechnoNikol» №25 - for the treatment of concrete surfaces, suitable for the top of the foundation.It can be used as a primer for painting.
4. Mastic water-based "TechnoNikol» №31 and №33 - water-based solutions for spraying are made using petroleum dispersed and emulsified latex.Perhaps applying putty mechanized way.Resistant - 0.1 MPa per day.
5. Mastic "Technonikol" MBK-G - mastic for hot application, is available in blocks and requires preheating to 160-180 degrees.Applied to the surface with a spatula, treated with a primer as a surface waterproofing or waterproofing roll.Advantages - low price and fast curing.
6. Primer "TechnoNikol» №04 - bitumen emulsion used as a primer coating of porous and dusty under bituminous waterproofing.The water-soluble, quick-drying, can be used for assemble and polymer waterproofing roll.

AquaMast Primer based on bitumen is used for ground under the asphalt mastic on the basis of organic solvents, as well as a roll bituminous waterproofing.Has good penetrating power, dries quickly.

also firm "TechnoNikol" produces waterproofing membrane mountable PLANTER, applied to highly protect the foundations and other structures from moisture, chemically aggressive substances, biological destruction.It is available in rolls, made of a polymer membrane that ensures removal of moisture from the inside cover, and profiled protective layer, improves the condition of condensation and the diversion of water to the drainage system.

All materials for the waterproofing of the foundation "TechnoNikol" certified, have a convenient package - rolls of a width of 1 m, metal sealed bucket of 20 liters, or briquettes.Detailed specifications and instructions for use contained on the packaging.