Drawings suburban toilets: toilet build their own hands

Not every country house boasts modern equipped bathroom connected to septic tanks, much more vacationers equip a toilet in the corner of the site, away from the well and the house.Suburban toilet in this case - a small building with a cesspool or a container.Nevertheless, even in a closet, you can create a comfortable environment, and if you put the fantasy, the cottage suite can perfectly fit into the overall design, and even become an ornament to the site.

drawing suburban toilet is very simple: it is a rectangular frame mounted on the pier foundation, leather lining, blockhouse or siding.Inside the shelf for easy carry, playing the role of the seat, equipped with a toilet door and a small ventilation window, connect the lighting.Construct a toilet can be over the weekend.

Drawings suburban toilet

suburban toilet design is very simple, and the drawings, you can pre-calculate the materials and build it with his own hands, with minimal carpentry skills.

1. frame wooden toilet is made of edged board 100x50 mm and is set to processed antiseptic runners of timber 150x150 mm.In cold regions the toilet can be warmed, for this purpose, 50-150 mm thick foam.Roof - pent, sloping back, it can be covered with any roofing material, for example, soft tile.
   

   drawing suburban toilet

2. Dimensions toilets are shown in the following figure.The height of the toilet is usually not less than 2 meters, width -. Not less than 120 cm
   

   drawings and dimensions of suburban toilets

3. end wall toilet has a rectangular shape and is going out of the board 100x50 mm nails or screws in the drawing.The side walls are trapezoidal in one wall of the box is done for natural lighting and ventilation.Exterior wall is made in view of the doorway.Walls operate separately and bonded to the finished base.
   

   Table cutting boards right wall

   

   frame yard toilet left wall drawing

   

   drawing walls toilet

   

   drawing walls toilet

4. skid beam 150 mm is required to handle an antiseptic,connect them to the studs or nails.To increase the stiffness in the lower grooves formed runners 50 mm depth and a width of 150 mm.
   

   Base - beam with a cross section of 150 × 150, treated with antiseptic

5. Lower floor made of planks 50x100 mm and sewn sheets of OSB, it can also be warm foam.If a toilet is provided raked, you must perform a hole in the back of the toilet floor.
   

   board cutting table for the lower floors

6. door frame can be made of a bar 50x50 mm, connecting them to increase the stiffness of diagonals.Door sheathe OSB inside, outside - the same material that the toilet itself.
   

   table (drawing) cutting boards Facade wall

7. pent roof Rafter system - naslonnogo type.Rafters are made of boards 100x50 mm, make gashes in them and fastened to the top board in the frame wall screws or nails.Step rafters - 40 cm
   

   Additional rafters with insulation foam toilet

8. Below is a specification of required materials..
   

   Table of materials needed for the construction of toilets

construction technology toilet at their summer cottage

1. Choose a location for the toilet, located no closer than 25 meters from a water source.If you place the toilet on the sanitary zone is not possible, the capacity of faeces and waste should be sealed, with no contact with the soil.
2. Dig a hole under capacity.Septic tank can be any size, with access beyond the toilet or placed under it.The walls of the pit can be put tires dug into the ground or metal barrel 200 liters.There are also special containers made of plastic reinforced with metal edges - you can use them.Spend backfill pits dug around the tank and tamp the soil.
3. Install pier foundation angles runners toilet.It can be made of bricks or concrete blocks.Above the columns is required to put a layer of roofing material.
4. Perform toilet base: 150x150 mm from the beam runners do the drawing, fasten them to the studs and mounted on a pier foundation.The runners are treated with antiseptic or used oil.
   

   basis for the toilet of timber impregnated with antiseptic

5. Over skid plank floor slab.For warming the toilet floor is performed as follows: the underside of the floor hem OSB sheets, placed between the boards frame insulation - foam, and then sew from the top floor sheets floor OSB.V provide an opening for drainage of sewage, dug directly above capacity.
6. 's drawings collected from wall boards 100x50 mm, fastening elements on nails or screws.Install wall frames on the base and is secured with the help of parts and screws.
   

   Putting toilet frame by drawing

7. flooring rafters according to the drawing: make gashes in the rafters, leaning on the top of their board and gable end wall, and then attach rafters to nails or corners.The roof sheets of OSB sewn bottom, between the planks laid insulation - foam.Above the foam plank roofing or waterproofing another roll on top of securing the decking, slate or other suitable roofing material.
   

   Make a roof for toilet

8. Toilet sewn outside - clapboard siding, Blokhus.Between the frame boards can also put a heater.
   

   toilet sheathe clapboard

9. The door is made of a bar 50x50 mm in accordance with the drawing.To make the box door pull together the strength of its two diagonal bars.The door is similar to the walls of the toilet sutured.Hung door hinges, handles and locks are fixed.
10. inserted into the side glass window.For this purpose, the board frame packed bar thickness of 20-40 cm on the perimeter of the window, insert the glass cut to size and fixed using glazing beads.
11. Inside perform shelf of the bar at the level of 40-50 cm. The bar is attached to the frame of the side walls at corners or nails.Perform internal lining toilet.Sutured shelf planed board 25 mm from the top and front, at the top of the hole make a hole in the toilet seat.Krepjat toilet seat with lid.
    

    toilet seat in the bathroom

12. If you wish to spend in the toilet and make electricity lighting.

timber for protection against decay be treated with antiseptic or special structures, paint, varnish.To the operation of the toilet to avoid bad smell, the contents of the sump should be disinfected using a natural antiseptic - peat, and every season pumped from the reservoir accumulated waste in it.If you want to avoid cleaning the sump, it is possible to connect the toilet to the septic tank, which can also make your own.