Sliding doors with their hands

In recent years become increasingly popular trend of home installation of sliding doors.They prefer their usual door for a reason.Actually sliding design has several advantages, some of them are: easy to open without a squeak and other noise, not traumatic, simple and inexpensive.

Sometimes the main advantages are that they allow you to save room precious space - thatWell, this can not but agree.Next will be discussed on how to install sliding doors with their hands, the material will be built as a step by step instructions for installation.

necessary to mention one important point.If you have irrevocably decided to install the sliding interior doors with their hands (video and photos auxiliary character can be found right on this page), then remember that this job is better to entrust the professional staff as skills approach can provide the highest level of installation, and therefore ensurea long and trouble-free operation of door components.Talk about how to make a sliding door with your hands is very complex, because it is strongly recommended to buy a ready-made kit.

Step sliding door assembly instruction

We need to think of the time that the unit is delivered to the door to the apartment, where it will be installed in the future, in a disassembled state.He's going on the spot.The door leaf, box and casing are packaged to avoid damage during transit.

Consider installation method when the door leaf is free to move along the doorway.Here we must note the main options furnish doorway: it tiles, decorative trim box and the most simple, ordinary wallpaper.Do not dwell on the finishing tile or wallpaper, and pay special attention to how the installation of a sliding door with his own hands, using trim box.

Raised box is installed in a pre-prepared doorway, and fixed by special wedges.In order to properly implement the control of the current installation, use level and plumb.

important point: the upper end of the door leaf mounted rollers, which are the main components of the sliding system.It uses a screwdriver.There have been a pencil hole.

Under the rollers there are special fixtures, which, like the first, are supplied together with the entire design.Most often installed flush handle - so the door open will be more convenient.

course, then there is mounting sliding door with his own hands, a process that requires accuracy and some patience.

The most important point that can be called when a blade rollers are mounted in the guide.Adjusting the fabric is carried out on a level with all of the same pegs.

highly recommended to use a high-precision level - is the key to a brilliant setup.Above the doorway is usually installed a wooden block to the lower end of which is mounted a guide rail.

must not forget that in the lower end of the door leaf has to be cut through a groove under the flag roller, which, in turn, is designed to protect the door from the transverse vibrations of nature.

This clip is attached, of course, directly to the floor.To fill any gaps using polyurethane foam, which is a good striker.

It can be concluded that the assembly of sliding doors with their hands - a difficult undertaking requiring specific skills and availability of the necessary tools.It is recommended to entrust the assembly professionals.

Video installation of sliding doors with their hands