How to cut tile

Careful trimming tiles allows to prepare it for gluing in the corners, at the junction of wall and floor.To make this work in several ways: Tile, glass cutter or grinder.Recommendations made by the choice of methods and detailed instructions to help get the job done quickly and correctly.

Which way is easiest to cut tile?

selection method should be carried out according to the tools used in the work.If the host has a Bulgarian home, it is suitable for cutting with diamond blade installation.Glass cutter requires a lot of effort when working with tiles than glass.But the accuracy of performance to achieve quality results easy.In addition, it is necessary to know how to cut tile correctly, that there was chipping and irregularities.To do this, you need to properly carry out the layout, to do the work on a flat surface, eliminating the element of bias.

Tile Cutting Tile

Tile presence or possibility of it at the time with friends quickly and hold a tile cutting easily.Hand tool is easy to use and does not require special skills of the performer.The following instructions tell you how to cut tile Tile in minimal time:

1. measure the part that should be left for future work.
2. At a special place marked gon Tile tiles cut.
3. exactly and without any bias towards (on a square) fit element.
4. on the tiles (on the incision site) set foot.
5. Trim motion performer holds the foot with the cutting component of the tile, using the knob to the carriage.
6. If necessary, the tile need to hold to avoid an uneven cut.

tile cutting grinder

No less popular method of using a grinder.It involves the installation of a durable diamond blade, which will perform the work without chipping.However, the resulting cross-section may have a lack of evenness.These guidelines will help you understand how to cut tile grinder domestic and semi-professional purpose:

1. on the tile layout is carried out using a ruler, a pencil and tape measure;
2. product is placed on a flat table, Cut (unnecessary) part should extend beyond the edge countertops;
3. With Bulgarians made an incision on the marked line with a dip of about 30% relative to the thickness of the element;
4. Upon receipt of deepening made a second incision, which allows almost completely cut the unnecessary part of the tile;
5. Prepared tile gently breaks at the site of the cut.

Upon receipt of significant irregularities can be done grinding scrapping.Full cropping using grinders are not recommended: this incision almost always leads to damage the glaze on the surface and damage the product.

tile cutting glass cutter

Any tile can be cut in the usual glass cutter.A popular method is difficult to call, but in the absence of other instruments it allows you to quickly prepare the product to complete the installation.How to cut tile glass cutter will tell the following statement:

1. noted the need for cropping land.
2. be cropped on top of the tiles along the guide marks lay tiles, on which it will be possible to perform accurate cut.
3. glass cutter is placed perpendicular to the bottom of the tile (the wheel must be exactly on the mark), the side of the instrument must be pressed closely to the guiding tiles.
4. Without haste held cutting along the track, you need to make sure that the tool is tightly pressed against her.
5. prepared under section line fit screw.With one hand, fixed left / right side of the tile from the face of the second hand rattles neighboring part of the product to complete the fault element on the line.

for quality of work should explore further the accompanying photo and video reports.They will help to avoid mistakes during the cutting.It is equally important to consider what to cut tile for flat line or semicircle (on the kitchen podium for the porch).In the first case, all these instructions are suitable.In the second it is recommended to stop the choice on the glass cutter or grinder.In carrying out the cut, regardless of the method chosen, be sure to wear protective goggles and gloves.

Video