Installing a bidet

At the current construction market represented a wide range of products for the bathroom and toilet.Among such a variety of options stand out a bidet, which in spite of its long history of existence, is not familiar to all modern citizens.Manufacturers of sanitary equipment offer several options bidet, differing in appearance and functionality.

Required tools and materials

So, in orderto install a bidet was carried out efficiently and in the shortest time, you need to prepare the following tools:

1. drill or rotary hammer drills with the corresponding diameter;
2. gas and adjustable wrench;
3. mounting tape or tow;
4. screwdriver and wrench;
5. silicone sealant.

Before you perform installation of a bidet, you need to carefully read the instructions and to comply fully with the recommendations of the manufacturer.It helps to view a video about the installation of a bidet, which intelligently and concisely show the most important aspects of the work.

Installing the toilet and bidet can be started as soon as all the necessary things will be on hand.Below are listed the main points, which is described in detail how to set up your own bidet.

If you are installing a bidet is performed with your hands, you should start with a mixer assembly.Most often used for a bidet mixer with a floating head or a hygienic shower.In addition, complete with models sold copper tubes or hoses.Set them in a blender, you can not use special keys.No need to do the job to make every effort.Otherwise, you can damage the rubber seals.

After the mixer is fully assembled, it must be installed in the hole, carefully securing.All the connections you need to carefully handle the sealant.To perform this operation, you can use a photo bidet installation diagram in this article.

should begin with a drain funnel.Once it is inserted into the corresponding hole should be sealed all the seams transparent silicone sealant.Next, you build the bottom of the siphon.For this purpose all the same transparent sealant.With it joins the corrugated hose.

no secret that the installation of a suspended bidet, as well as the installation of floor bidet, begins with the marking surface.It should be noted that the bidet installation dimensions must be carefully to die out and fixed on the surface.In the event that it is about the attachment to the wall, it is necessary to measure in advance and calculate the required height.After that, in using the gun should be done in the wall of the hole.In order not to damage the tiles, must drill a hole at low speed.To clean the surface from dust using a vacuum cleaner.

Sometimes you need to install a bidet installation.To do this, use the instruction.Installation, as well as a bidet is attached to the surface of special bolts.After all the work will be finished, you can install a bidet lid.

In conclusion, it should be noted that the installation of a bidet in the level of complexity comparable to the sink unit.Therefore, if you observe all the rules, you can do this type of work.

photo the cover on the toilet-bidet

Video installation bidet own hands