Restroom

August 12, 2017 18:05

Repair toilet plastic panels

Restroom

click fraud protection

Today, plastic panels are widely used in different types of repair.Their main advantage is the principle of the designer, allowing the panel to disassemble if needed.Due to the design of plastic panels, improved wall can "breathe", which is important under conditions of increased moisture.The huge popularity of such material has provided its efficiency in comparison with the tile, wallpaper, stone.

Content

Preparing for repair
Installing panels on the ceiling
Repair walls
Photo repair toilet plastic panels
Video repair toilet plastic panels

Preparing for repair

Repair toilet plastic panels on the time it takes 1-2 days.Firstly, it is necessary to determine the plastic panels with 8 mm thick, which are much more practical than 5 mm.After all, the thickness of the PVC panels less the probability of failure increases the lock during assembly, which contributes to the appearance of cracks at the joints.The amount required will depend on the plastic flat perimeters, but would need to add 10-15% of the material, as in the process will be a lot of scraps.When the need to pay attention to the water supply, which must remain open or it should be easy access.

When plating toilet uses UD and CD profiles of metal.In addition to this handy plug-nails 6x40, suspension brackets for mounting profile, white silicone adhesive, a press washer sizes 3,9h16.

From tools will be used: Bulgarian, water level, hammer, hammer, cutter.

Installing panels on the ceiling

Repair toilet plastic panels with their own hands is quite simple.You just need to consistently implement these actions:

assemble frame consisting of metal profile, for fastening to it of plastic panels;
repel the ceiling level line using the water level;
profile UD fixed on the ceiling line, using dowel-nails.Next to the UD profile, thanks to the press washers, fasten the CD profile.Each strip CD profile must be fixed at a distance of 60-70 cm and targeting them in two places to the ceiling did not cave in due course;
set of panels is recommended to start from a better overview, because the last strip will need to be cut with a high probability.

Please attach a starter strip, which will start the installation and plastic.Each strip of plastic attach press the puck to the CD profile.

You have to be very careful with plastic, which is fragile and careless movement can break the lock.Watch video and photo repair toilet plastic panels can be in this article.

Repair walls

principle works with walls the same process on the ceiling.First, we collect the metal frame of the profiles, taking into account all the levels.And do not forget to make a vertical baffle, thereby amplify rigidity.For the joining of strips used on the corners of the inner corner.As is the case with a ceiling naborku starting from plastic with better visibility.The outer corner is used in the process of joining of plastics, the repair of the bathroom plastic panels to close the sewer pipes.Fixing upper baseboards or moldings made silicone adhesive, but you can adjust the lower dowel-nails.