Restoration of bathtubs with acrylic liquid

Self restoration of cast iron tub with liquid acrylic is available to every householder.Work takes about 3 hours and is carried out using available tools.Update allows you to recover even a very old bathroom.Consider the article in detail how this is done.

step instructions for baths restoration liquid acrylic

Run operation willany homeowner: it is not carried out quickly, so you can eliminate common mistakes and carry out restoration quality easily.Also important is the low cost of the method.Buying a new bath will cost 2-3 times more expensive.While purchase liquid acrylic (stakril) can be in any hardware store without any problems.The kit includes the basic mixture and hardener.

Using hardener is mandatory.It affects the density of the composition.Therefore, the "tub filler" is produced flat and has no unattractive streaks or roughness on the surface.But the need to carry out the correct preparation to obtain a good result.Running the restoration of the old baths with liquid acrylic pursuant to such instructions:

1. Clean the old enamel bath, which has come into disrepair and became a crack, peel off from the surface.

2. Flush Pemolyuks.The composition removes the residual deposits, dust formed as a result of grinding.

3. Running removal system drain / overflow (or plugs).

4. Held degreasing.

5. Acrylic is prepared: a mixture of curing agent is added, the composition is mixed.It is important to take into account the accuracy of the job and mixing with minimal effort.The formation of bubbles in the liquid acrylic unacceptable.

6. Harvested mixture is applied to the bath (you can pour on the bottom part for convenience).The work should start with the angle, gently spreading the composition on a side.Implement application should be without haste, or after solidification on the surface may be bumps and drops.

7. For the distribution of the liquid acrylic on the wall should be more of a mixture of distributed, pour on top.Acrylic flocking is evenly distributed to avoid large sag.

8. After applying the composition of the bath should be just dry up.Duration of hardening depends on the brand of liquid acrylic.Approximately mixture solidification period is 36 hours.

considered suitable technology for even very old bathrooms, which the owners were willing to throw out.Total 2-4 hours of work can be fully update a product and give it a neat view of the snow-white.Therefore, this method has received positive feedback from people who have used it in their work.

Features conduct procedures and expert advice

Aside from the tips and instructions to help readers in the accompanying photos and video.It is recommended to view them several times before the restoration.Careful preparation will avoid many mistakes and allow good, and most importantly beautiful, update the bathroom for a minimum of time.

Video