Facing the fireplace made ​​of plasterboard with their hands

Contents fireplace can be different.The greatest scope for imagination gives lining of the drywall.It can make the usual rectangular shape, it is possible to build a structure very unusual shape that will fit into any style of interior.Perform it easy, and the result is stunning.The main thing - to comply with all the recommendations, do not rush and do everything carefully.After facing the fireplace with his hands requires certain skills.Only in case of compliance with all the nuances of the technology can be proud of the result.

preliminary stage

necessary tools are prepared before starting work andmaterials:

• plumb and level;
• pencil and a knife;
• line, square, tape measure;
• hacksaw and screwdriver;
• hammer drill, dowels;
• profile;
• drywall.

advance thought out exterior cladding, finished drawings.You can consider the simulation of the chimney, it looks spectacular.In the drawing, all the sizes are fixed.Then, drawing on the wall is applied to the future shape of the lining.So clearly it will be seen whether the planned approach to the specific dimensions of the room.On the deposited line should be assigned profile.This will give a more complete picture of a future fire.You should also think about what will be in the place where this happens fireplace insert.If there will be placed the electric heater or electronic photo frame in the future, the size of the firebox should be done appropriate.

is also necessary to prepare a place for work.Its clean, remove all unnecessary.The surface must be flat, solid.

main stage

frame - this is a very important stage facing the fireplace made of plasterboard with their hands.From its shape depends on the look of the future fireplace.Creating a framework - a process that consists of several basic steps:

• Step 1: Measure Profile fragments size.
• Step 2: Cut the profile.
• Step 3. Assemble the profiles according to the drawing.For connection is necessary to use self-tapping metal.

You must try to be precise, even a minor deviation could lead to a breach of the proportions and skewed products.The photo and video cladding the fireplace with your hands can be seen that the support frame is mounted to the wall.The method of fastening the frame depends on the wall material.By the wooden walls of the profile is attached with screws to the concrete and brick - with dowels and screws.All components are connected in accordance with your plan.Individual pieces can be made semi-circular.To do this, simply make incisions in the profile draws a semi-circle and the line and folded material inside.

Then you can start to install drywall sheets.First, from a sheet cut out the necessary details in accordance with the frame size.Measure the distance between the frame members, applied marking pencil on drywall.It is cut with a knife along the lines.The individual elements are attached to the frame.The distance between the individual fasteners must not exceed 10 cm.

Making surface

When the lining of the drywall need to take care of the end result appearance.It is necessary to eliminate the gap, to give the aesthetic appearance of the fireplace.In this case, technology is facing the fireplace with his hands provides several options.One of them - a coat and subsequent painting.It looks nice finish with decorative plaster, for example, plaster of marble chips.It is also possible to coat the surface of a decorative stone.

That will have a wonderful decoration, the apartment creates an atmosphere of a chic country house.

Video facing the fireplace made of plasterboard with their hands