cam boards

to reduce costs in the construction of interior partitions used pazogrebnevye (GWP) of the plate.Their size (standard - 667h500h80 mm) allow masonry at a faster rate than when using a standard brick.This saves many of the characteristics of masonry.

Features GWP plates

cam boardsplates have good strength and high geometry.Especially high-quality products are considered Knauf boards and Volma.Wall created out of such plates does not need additional plaster.Wallpapers can be glued immediately after priming.If you want to hide the utilities, you can spread the plates in 2 layers.Also mounted between the insulation plates, they do in the case where the space bordered by the cold space.

Properties gypsum partition plates meant a compound of grooves and ridges at the time of installation by using adhesives.It is advisable to carry out docking an, positioning the groove up to the glue evenly spread over all over all grooves.you can watch the features of such products on the installation of photos and videos.

Specifications gypsum partition plates

Specifications gypsum partition plates depend on the material from which the product is created, as well as from the manufacturer.

GWP plate standard full-bodied 667h500h80 mm has the following parameters:

• density of not more than (kg / mᶾ) 1350;
• The compressive strength of not less than MPa (kgf / cm²): 50;
• Bending strength, not less MPa (kg / cm²): 24;
• Water absorption, max%: 30-35;
• insulation index of air noise in dB: 43;
• weight of one plate, kg: 28-30;
• piece.in m²: 3;
• piece.in mᶾ: 37.5;
• piece.in pallet: 32;

GWP plate water-resistant full-bodied 667h500h80 mm has the following parameters:

• density of not more than (kg / mᶾ) 1350;
• The compressive strength of not less than MPa (kgf / cm²): 50 (dried to constant weight);
• Bending strength, not less MPa (kg / cm²): 24 (dried to constant weight);
• Water absorption,% not more than 5;
• insulation index of air noise in dB: 43;
• weight of one plate, kg: 28-30;
• piece.in m²: 3;
• piece.in mᶾ: 37.5;
• piece.in pallet: 32;

GWP plate standard hollow 667h500h80 mm has the following parameters:

• density of not more than (kg / mᶾ) 1350;
• The compressive strength of not less than MPa (kgf / cm²): 50 (dried to constant weight);
• Bending strength, not less MPa (kg / cm²): 24 (dried to constant weight);
• Water absorption, max%: 30-35;
• insulation index of air noise in dB: 41;
• weight of one plate, kg: 25-26;
• piece.in m²: 3;
• piece.in mᶾ: 37.5;
• piece.in pallet: 32;

GWP water-resistant hollow plate 667h500h80 mm has the following parameters:

• density of not more than (kg / mᶾ) 1350;
• The compressive strength of not less than MPa (kgf / cm²): 50 (dried to constant weight);
• Bending strength, not less MPa (kg / cm²): 24 (dried to constant weight);
• Water absorption, no more than% 5 (with sealed cavities);
• insulation index of air noise in dB: 41;
• weight of one plate, kg: 25-26;
• piece.in m²: 3;
• piece.in mᶾ: 37.5;
• piece.in pallet: 32;

Plaster GWP

Asked what it is pazogrebnevye pits made of gypsum, what their advantages are, it should be noted that they are manufactured from gypsum G4 or G5 with a variety of additives, including those which may be Portland cement andblast furnace slag.Accordingly, the products have a different degree of absorption of moisture.Therefore, we can distinguish normal and moisture-proof plate.The last look different green.This characteristic is fundamental when choosing the scope of application of gypsum partition plates.

Conventional plates used exclusively in dry areas, because their main disadvantages include the inability to withstand constant exposure to moisture without loss of load-bearing properties.For areas of high humidity require moisture resistant construction materials.

This product has excellent characteristics.GWP 80 mm level is schumoizolyatsii concrete wall 400 mm.Thermal insulation is excellent, high fire resistance.To reduce the weight of the masonry, hollow cam boards are created, they weigh a quarter less, keeping all the characteristics of full-bodied.

Silicate GWP

These products are high temperature and high pressure in the autoclave chamber.The material is silica sand, quicklime lump lime and water.Gypsum products from silicate have a higher strength and a good ability to resist moisture.These indicators make it possible not to limit their scope.

Silicate GWP is not prone to warping or rotting, has good permeability.Electricity is not carried out, fire-resistant.

Benefits

This material allows you to mount the internal partitions at the end of the main construction works.It is easy to change the internal layout.Adjustments can be made in it, and after the start of operation of the facility.Small increases the thickness of the inner area, in large buildings, these figures are quite impressive.Robust and reliable partitions created from a gypsum partition plates, a long time do not require maintenance costs, while preserving all their qualities.

Reviews indicate that the premises where the inner walls are made of GWP, have high noise insulation, eco-friendliness.High resistance to fire makes it possible not to create additional special design of fire-retardant purposes.

Video