Today, the majority of owners of private houses pay much attention to the exterior of the house.After a fine façade cladding, the house becomes very beautiful.Thus housing can enjoy every day and marvel at the same time.Also facing the house greatly increases its value, so it's a great option for those who are planning to sell your home at a bargain price.Materials for facing there an incredible amount, but it is a brick experts call the best option.

main advantages of bricks

main advantage of bricks is to protect from atmospheric precipitation.However, there are many other important features such cladding.First of all, it gives a kind of monumentality housing, especially if it is a brick wall of a wooden house facade.If the house is not in the best condition, it is this type of lining will be really relevant.

important to understand that the facade facing brick house does not increase the heat dwellings.To achieve this effect, between the carrier wall and facing material should be ventilated gap.It is a space removes unwanted condensation and promotes air circulation.This type of liner can significantly improve the thermal inertia of the building.

should look closely to the acquisition of high-quality bricks it.This material does not require constant care, and do not begin to burst in a year or two.It is best to give preference to well-known construction companies.Exterior material may also be an important factor in determining the quality bricks.Bright colors and funky patterns may indicate the material is not the highest reliability.

Types of bricks

A couple of decades ago, it was difficult to find some variety of this material.Now, because of unprecedented range of choice is very difficult.Without the help of a consultant almost indispensable.

First of all you should know that the bricks are divided into perforated and solid.It is the first option would be excellent if you want to take your home insulation.Advantages of solid brick end to its high strength.

Face brick is divided into several categories, from which and should be repelled those who plan oblitsevat your home:

• clinker;
• glazed;
• ceramic;
• hyperpressed.

Clinker greater appeal to those who appreciate this special material durability and wear resistance.This material is most suitable for technical facilities and workshops.The appearance of the material is also very good.

On glazed brick during the manufacturing special layer is applied to the glaze.This not only creates a variety of cladding appearance, but some bulk.Very often, designers use the material to create an original interior decoration.

Ceramic brick has a unique appearance.It is actively used in different types of facing buildings.The result is a really solid structure with a variety of graphical features, which may include patterns and entire image.

Hyperpressed brick is original material, which has been actively used only the last dozen years.It is made in an unusual way - without annealing.only cement and limestone included in the composition of the material.This brick looks very impressive, and its properties are uniquely satisfy even the biggest skeptics.Durability is an order of magnitude higher than that of the classic brick, but at the price of the facade facing brick home is clearly not on the side of hyper-pressed materials.

Preparation facing

there is nothing difficult in front of the house facing bricks with their hands, but it would be ideal if the first action you will help the person who has the slightest experience.It is also important to know that one is better not to engage in such cases.There should always be someone who will help those or other actions.Ideally, the work taking three or four people involved, and everyone does their job.

While facing front of the house under a brick is important to understand that this process is more complicated classical brickwork.Beyond the usual action will also have to pay attention to the aesthetic component.This factor should be decisive, because the beauty of the home - a really serious thing and any malfunctioning clutch can lead to regular trouble.The photo of the facade facing brick house is shown from all sides.

should make a preliminary laying before the main action.This requires simply laying bricks, but without mortar.This way you can see exactly where you will need to trim brick, and where does remove.Ideally, when the masonry is not necessary to engage in cutting of the material, then after all the work structure will definitely look perfect.Also it will be possible to detect defective during pre brick masonry.Definitely worth to quickly replace it with a normal material, so you do not have to separately deal with two or three masonry bricks.

main tools

During masonry must be a lot of tools, each of which may need at any moment:

• bowls, basins and buckets (data capacity needed to fill the solution,and which is used to bond masonry);
• mixer (This unit is designed for the preparation of the solution in large quantities);
• trowels (this tool is essential for applying the solution to the brickwork, it is suitable for editing many of the actions);
• construction goats (data devices will definitely need if you need to impose a high building);
• measure, plumb lines, string, levels (data support tools to help perform tasks with high precision and excellent quality of masonry);
• template (this device helps to gently apply the solution onto the surface, and also to make the clutch the following rows of bricks);
• Bulgarian (this tool will help cut the brick, if you are having some difficulties with the size of the material).

most frequently used these tools, but in the case of some exotic materials can be used, and others.It is important to stock up on all of these tools in advance, so that already during the laying process does not have to be away and to interrupt the process.

produce Bricklaying

If during the work there is a need noninteger bricks, should be as soon as possible during the process, to begin cutting material.This will save a lot of time, and will also allow, without tightening to make the whole volume of the masonry.Also, it is important to pre-mix a solution to the beginning of the work it was possible to use.Next, perform the following steps:

1. start laying the first row.It should be laid out around the perimeter of the structure.Pay particular attention here should be performed adjustment operations.Any mistake can damage the overall structure of the masonry.The solution was applied to the brick by means of a template.Many do not need to put a solution, it can even harm the integrity of the lining in the future.
2. second row put in a different way.You must first put a brick on the sides of the row.Again, the solution is applied to the pattern.This avoids mistakes and certain surface contamination.And this factor is very important, because the lining, most often, it is used as a decorative material.Likewise laid another 5 or 6 rows.
3. After laying the bricks in the corners, you must stretch along each row of thread around the perimeter of the structure.This will most definitely make a clutch of series in the rest of the house.Such simple operation allows you to really get a chic result masonry.
4. should also take care of the joints brickwork.To suit the aesthetic component is really all you want to apply a special tool which smoothes out the seams.All this should be done even during the laying, otherwise then hardens solution and help it will not succeed.
5. continues to produce masonry brick.Regularly check the evenness of masonry should be using level.Do not forget about the grouting.Each new series is equipped to be a template, because the appearance of the lining, eventually, to be chic.