Warming bathroom

bathroom - this room in the house, which should be warm all year round.Therefore, making repairs, you need to take care not only about the design, but also for insulation.When choosing the material for walls and floors, you need to pay attention to their specifications.

Choicematerial

cold in the bathroom and humidity - a fairly common phenomenon.Especially if the room is on the side porch.To avoid this, you need to think carefully about insulation bathroom.And, above all, must be responsible approach to the choice of material.

For warming the bathroom often use such materials:

1. Mineral wool.Mineral fibers constituting this material is passed through the air heat insulating layer.And, then, the condensate is not formed on the wall and ceiling of the room.
2. foam.One of the most commonly used insulation.It retains heat well and repels moisture.Among the main shortcomings can be identified is that bad foam passes pairs, and therefore, under the insulating layer will accumulate condensation, which leads to the appearance of mold, mildew, and the destruction of the walls.
3. polyurethane foam.The material is durable, permeable, moisture-proof and refractory.Due to the low weight does not give additional load on the ceiling and walls.It can be sprayed on any surface, it is well connected to the surface.

Wall insulation bathroom

as insulation for the walls and ceiling can act foam that does not absorb moisture.When warming the bathroom should be considered from the inside, that any material makes the room smaller area.

to insulate the walls need to perform several steps:

1. Clear wall from plaster and finishing material and apply a drug that will prevent the appearance of fungus.
2. In foam adhesive is applied and attached to the wall, lightly pressed, the material stuck.
3. Top foam glue moisture resistant drywall.
4. on drywall lay ceramic tiles or any other decorative material.Tiles are most often used for the bathroom, because it does not transmit moisture.

There is another option insulating walls:

1. Produce metal frame of the pillar profile for GCR.
2. insulate Put in two layers.
3. Top pull IZOSPAN.
4. Stick two coats moisture resistant drywall.
5. Perform finishing work.

To the bathroom was warm, good ventilation is also important to be output pairs out.This design is also in need of insulation.For this purpose, a special vents mounted grill with fan, he pulls vapor from the room while the cold air does not get inside.

Do not forget about the sewer shaft, it is also necessary to insulate, because through it enters the room draft.

Insulation of the ceiling in the bathroom

The ceiling in the bathroom, as well as wall insulation needs.Because it collects most of the moisture, and therefore, it is here in the first place is formed mold.And to avoid this, you need to perform a number of works:

1. start work you need to clean the old coating.
2. Process ceiling antifungal gel.
3. Apply the plaster on the ceiling.
4. Attach insulation.Not only does it eliminate the condensate, but also serve as a good sound insulator.
5. on top of a heater to put the finishing material, the most commonly used plastics, but also popular are the ceilings.

Floor Warming in the bathroom

After you select the appropriate insulation for the floor, you can begin to work:

1. Move out of the room all that can be removed, the floorIt must be free.
2. Remove old paint.Incidentally, the heater can be put on top and tile, but then the room will be less.
3. Align concrete base.
4. Put insulation.
5. on top of a heater to put a couple of layers of vapor barrier material.
6. Make reinforced mesh tie.Along the perimeter of the room to walk foam to buckle does not touch directly to the walls.This way you can avoid the extremes of temperature and cracks.
7. Once the screed has dried thoroughly, put a new foundation, for example, linoleum or tile.

If insulate the floor in this way, in the bathroom will never be damp.

system "warm floor»

Most often, the bathroom floor is lined with ceramic tiles.And if the summer on it comfortable to walk in the cold weather of the city is best to take care of the heat for the feet.To come up with this "warm floor" system.It consists of heating mats.They are available in different sizes.In addition to the electric version of the floor heating, there are heating with hot water.This option is less expensive but is not always available due to the fact that the quality of cleaning plumbing low.Therefore, most often resorted to an electric warm floor in the bathroom.

Electric floor heating is not an independent system, but only the application to the central heating system.

to spend in the bathroom floor heating is necessary to perform several steps:

1. necessary to prepare a solid foundation, it must be dry.Can approach the old floor in the room, if it is uneven or damaged, you will need to re-lay the cement screed.
2. Secure electric mats on the ground.
3. Each mat has two wires to 4 m in length, they are connected to the mains voltage of 220 V. It should be remembered, putting mats on the floor.
4. Top lay linoleum.

system can be programmed at any temperature, and it can run at intervals.

advantages of underfloor heating believe:

• low installation costs;
• independence of the central heating;
• long service life;
• a slight increase in the thickness of the floor as opposed to the water heating system.

All work on the floor warming simple, they can hold their own and thus save on construction works.And, most importantly, - be sure that the quality of work performed and is now in the bathroom will be warm.