Arch made ​​of plasterboard with their hands

Construction of plasterboard striking for its simplicity and elegance.This versatile material can do almost everything: ceilings of different levels, shelves and arches.

Make an arch with their hands plasterboard not be easy.It will expand the space of the room and can take any, even the bizarre shape.

Advantages arches

Experts find it difficult to enumerate all the advantages of the arches.The result will depend on the version of its finish.The main objective of building arches is not to protect the room from one another, and vice versa - to connect them visually.

When planning space with arches, architects are trying to think through each step to get away from the stereotypes of many years.So, now it is not taken to install the door in the living room.It is better to make an arch, to get a sense of common space.

Also, if you build the arch of the drywall between the living room and kitchen, then the transition will look more harmonious.Furthermore, it is possible to freely move from one room to another.Manufacture of plasterboard arches will expand the space of the room considerably.

Types of drywall arches

Form arches there are so many.First of all, you must decide what is necessary for you.

There are such forms of arches:

1. active.
2. passive.

to an active form of arches include construction of complex forms through which you can see several rooms.Such designs are considered to be more than a decorative element.Their complexity will depend on the interior.

Passive arch has a simple structure.Typically, such an arch can be seen in small apartments or small rooms on the area.

Consider the main types of interior arches of plasterboard.

1. Classical arch.Yet it is called a round.It is considered the most practical and suitable for any room.Classical arch harmoniously fit into any decor.The winning design will look, who has a small deflection.The massive and broad, too, decorate the room, but they must comply with the design of the room.Among the shortcomings of such arches can be noted that such a structure will take the height of the opening, which is especially important in small indoor area.

1. «Modern" or segmental arch.It has an original design.This decorative element suitable for a doorway in a large room.The ideal location for the - in front of the window.It goes well with ceilings and walls with little relief.Suitable for wide openings with thick walls.To highlight and enhance the beauty of the arch, it is desirable to perform the finishing of wood.

1. Arch "Portal" - both original and easy to perform.Created on the basis of load-bearing wall or partition to decorate a doorway, allowing the door and called the arch of the drywall.Often, such a structure is set, if the door is not necessary.After its dismantling space is decorated with panels of wood, mirrors, constructing niches, shelves and lighting elements are added.

1. «Romance» Arch.It occurs less frequently than the previous types.The design has two radii and a flat portion at the top.It looks very advantageous.Among the advantages of such an arch marked by low consumption building material.

1. Poluarka.Stylish and popular option.This form of design often chosen by young couples.Characterized in that a circle may have different or only one rounded corner.

Design arches of plasterboard can have these types:

• lancet.For fans of the Gothic style.The two plane arches converge at an angle, forming the upper point of the design;

• Delicate Arch is characterized in that in its upper part and on both sides can be located through-holes;

• Arch design has several levels.Different design intricate shapes.It is almost impossible to do on your own, because in addition to the fantasy must have experience working with plasterboard.

How to make arch of the drywall

For the construction of the arch, we will use the drywall.This building material has several advantages:

• affordable price;
• easy to assemble;
• design easy, so do not bear the additional load on the wall.

Attention!If the height of the door opening is less than two meters, then make the arch is undesirable because it will take away part of the space.It is more expedient to simply round off the corners of the door opening.

Materials and tools

For installation of arches made of plasterboard required:

• sheets of drywall (use special, sheet thickness - 6.5 millimeters);
• metal profile;
• dowels;
• screws (size of 3.5 to 25 millimeters and 4.2 millimeters to 13);
• construction drywall knife;
• metal scissors;
• pliers;
• level;
• pencil or marker;
• drill;
• screwdriver or screwdriver;
• punch;
• needle roller;
• adhesive tape;
• stucco and trowel;
• sandpaper;
• corner (for decoration arch edge);
• primer mixture;
• paint (or wallpaper).

first prepare an opening.Door frames should be dismantled completely.If necessary, the space may be slightly increased due to the wall.The surface clean from dust and dirt.

Preparation

1. Getting markup.You can use a segment of a plastic plinth or lining (we needed any flexible material).Bend the strip to form the arc and insert it into the prepared hole.We put a mark in the places where there will be an arch edge.
2. Fasten metal profile.To do this, take the pieces of metal profile and set the guide: top and sides.Position it so as to form a small depression equal to the thickness of the drywall.Make sure that the distance between the right and left profile was the same, or get a skewed arch.
3. Take the dowels and insert them into the wall at a distance of 15 centimeters from each other.
4. Now you need to set the profile in the arc-shaped hole.To do this, take a metal profile.Using scissors make cuts metal and give it the desired shape.By the wall profile is attached dowels and screws to the plasterboard.

1. To further ensure the rigidity of the frame, the space between the arcs need to add a few more pieces of the metal profile.

Fixing the side panels

can use drywall wall to the side of the arch.The layout is performed by means of a pencil, a homemade compass or flexible plate.Cut the arc contour better jigsaw, metal nail file or a sharp knife construction.Fasten the side panel screws on the arches.

How to bend and hem drywall

1. To make a neat bend drywall and close the end portion (bottom) design, cut strip.Its width and length must match the size of the frame.
2. perform accurate measurements.To do this, use the building flexible meter, add to the length of the resulting figure of ten centimeters.
3. to the segment of ordinary drywall turned arc, it is necessary to moisten it with water from the bottom and go over the surface with a spiked roller.When the surface of the drywall slightly softened, start gently bend it.Secure the arcuate structure to the arch on the tape and leave to dry.Remember that much water to wet drywall is impossible, because it can soften and crack.
4. Now we have to fix a strip of self-tapping screws on both sides.Start fixing the workpiece to the middle.
5. Wait until completely dry drywall.

If the arch lights was planned from the drywall, then at this stage it is necessary to make holes in the drywall for the lighting installation.

arches Finishing Drywall

After the construction of the arch, it is necessary to prepare to finish.With the help of a brush and a mixture of primer is necessary to treat the surface well and leave for 24 hours to dry completely.

Options finishing drywall arches very much.

Consider popular:

• decorative mixtures;
• wallpapering;
• finish with decorative stone.

Finishing decorative plaster

To perform decorative finish arch mixture, you must first treat the surface of ordinary putty.Dissolve the dry mixture with water (the proportion of read on the package) and with a spatula, apply a thin layer of solution.When it dries, irregularities should be sanded (or sanded) and process the surface of the primer mixture.Now you can put a decorative mixture to give a unique relief arch.

When the decorative plaster is completely dry, it can be covered with a thin layer of paint.

arch trim wallpaper

trimmed arch made of plasterboard wallpaper not be easy.With this work can handle even the novice.

Work Plan for wallpapering arch is such:

1. Spread the glue according to the instructions.Make sure that the mixture is homogeneous, without lumps.
2. Prepare a band of the correct size.First you need to apply wallpaper on the wall near the arch.This is to ensure that the next band covered arched doorway.After gluing strips cut the protruding portion, leaving the stock two-two and a half centimeters.
3. Make small incisions in the free edge (allowance).
4. Fold the wallpaper and glue to the slope to the surface.Try to press the paper firmly to the wallpaper would not leave.
5. paste over just as well and a second side of the arch.
6. remains to seal the vault arches.For this cut a strip whose width is equal to the depth of the opening.Its length should be slightly larger than the size of the arch.So it will be easier to move the bar to combine drawing.
7. Smooth wallpaper dry towel to remove any air bubbles.

Finishing arches decorative stone

Finishing arches decorative stone will give the room the nobility.This arch last for several decades.

How do finish in stone:

1. To finish the stone does not necessarily seek to align perfectly the surface.
2. Prepare a solution.Depending on the type of material of the composition may differ slightly.The standard solution consists of sand and glue, lime and cement.If you do not want to make a solution, you can buy special glue "liquid nails".
3. Take the stone and place it at the bottom - on the walls and opening the junction.Press firmly against the wall.
4. To plug the corners, the stone can be laid on top of each other "overlapping".
5. stones set along the arc of the arch, should be cut only by its radius.You can use the sander or wire cutters.
6. seams sealed with a solution (it should be sold, together with the stone).

What turned arch of the drywall, you can see in the photo:

Mounting arch arch made of plasterboard look at the video: