How to make a rack of children's own hands

The children's room is always a question of organizing space.Scattered toys, clothes and books - practical and convenient place on the rack.Stylish and beautiful shelves in the children's room is easy to make yourself.With a little imagination, you can jot down a simple but interesting drawing - scheme.Apparatus in nursery rack operably that during child growth check, it can be transformed.Build up additional section or width.Some of the shelves can be removed by increasing the cell or vice versa mount new.

Produce rack for children's own hands afford even to someone who has never faced the manufacture or assembly of the furniture.a variety of materials used for production of racks.Wooden planks and beams, laminated chipboard, as well as the rack frame can be made of metal corner.

scheme simple shelf in the nursery

Tools for making wooden rack

to manufacture the rack, you will need carpentry and measuring tools:

1. Roulette and carpenter Area, clamp.
2. Hacksaw for wood, drill, screwdriver with set of bits, hammer and pliers.
3. chisel or a chisel, plane and sandpaper.
4. Furniture fittings for mounting shelves and the frame of the rack to the wall (corners, drums and so on.).

rack made entirely from timber and planks or combined.Acceptable manufacturing shelves from MDF, laminated chipboard or thick plywood 18 - 20 mm.Wooden board width is selected depending on what you plan to store on a shelf.The thickness should be at least 2 cm.

procedure of manufacturing a rack for baby from boards

Joinery gussets frame rack

It is important that the board, a cut had a solid corner connection size.It is best to make a connection via studs and eyelets.In the end the ends of the boards made cuts with a hacksaw on wood with small teeth on the thickness of the mating board.

chisel or a chisel groove produced by the sample spike.It is important that the dimensions are respected with maximum precision.The joints are glued, joined and clamps are tightened to complete drying.

desirable from the inner side of the frame to put the additional attachment of the metal angle.

Intermediates shelves and vertical walls

In the final frame to make an accurate counting of the installation of horizontal shelves and vertical partitions.For the middle of fixing intermediate shelves, is profiled connection crest on the tongue, square or round.

most simple connection of round wood stud.To do this, the marked frame board through holes drilled under the wooden stud.The mating ends of the shelves to the frame are drilled to a depth of the nest, is 2/3 the length of the stud.

For precision connections must meet strict requirements.The studs are coated PVA glue or carpenter.

After the final drying, the rack for a child's room is treated with emery paper, opened stain and varnish or paint.Installed in his place rack fastened to the stability of the wall with metal corners.

Manufacturers shelf in the nursery of plasterboard

From drywall to make a shelf in the nursery very easily.This rack will turn stationary and will serve you for a long time.To start drawing outline the future of the stack and calculate the necessary amount of drywall.Standard sheet of 1.2 - 1.3 meters in width and from 2 to 4.5 meters in length.The thickness is from 6 to 24 mm.If on the shelf in the children's room you have provided a place for the TV or intend to store other items that have a lot of weight, instead of the standard profile metal purchase area.

frame is usually mounted from a standard UD profile.Profiled base slats fastened with screws to the wall and floor.They are built vertical frame sides, the intermediate piers and horizontal shelves.rack frame constantly check for compliance with the spirit level horizontally and vertically.

mounted on the frame by means of screws for metal (25 mm) fasten the top and bottom shelves.Further test a spirit level, continue to sheathe plasterboard frame rack screws in small increments.Work is not difficult with him, not even you can limit yourself to straight lines and angles.This material allows for different radii and smooth transitions.

Caulking rack for children's plasterboard

surface is cleaned of dust and dirt.Places screwing screws treated with a special primer.

on joints and the joints glued special reinforcing mesh.These places are also treated with a special primer.

On slopes and angles set a special metal or plastic corner.For arched or curved shelves have special bendable corner.

for mounting over the putty is applied on both sides of an even layer and is pressed to the limit.Speaking through a perforated plaster is removed with a spatula and smooth on the plane, gradually leveling the surface.

After drying, the first launch layer of putty, apply a second finishing coat.On the trowel must always be clean and smooth edge of the working edge, so as not to damage the surface finish.

After drying, the surface finish, all float plane polished with abrasive removable mesh are coated with primer before painting and painted with latex paint.Your children's furniture and shelves must be in harmony in style and color scheme.