Bikroelast

Bikroelast refers to bitumen roofing materials of the latest generation, focused on long-term operation (over 10 years).It is used on roofs with a slight slope or for basement waterproofing.Inability to use on roofs with a steep slope is a disadvantage of this material.

Properties

Specifications bikroelasta based on the features of its foundations and protectivelayers.The basis usually take fiberglass, polyester or fiberglass.On the basis of high quality applied modified bituminous composition, endowed with astringent properties.This binder component is enriched technological additives, which improve the characteristics of the material.Properties bikroelasta allow him to bend well at temperatures down to - 10 ° C and can withstand heat up to + 85 °.This is an undoubted advantage makes it possible to use bikroelastom in all climatic zones.Is applied on top of the foundations and a protective polymer film sprinkling, it can be coarse (or slate asbagal) and fine (sand).

Specifications bikroelasta

Species bikroelasta

Since both the base and the protective layer may contain various components, certain types bikroelasta stand.They are labeled with abbreviations.The first letter represents the foundation from which the material is made.T - fiberglass, E - Polyester, X - fiberglass.The second letter - a designation of the upper protective layer vapor barrier bikroelast.K - Coarse-grained.The third letter indicates the lower protective layer.P - polyethylene film.Digital Signage show what the weight of 1 square meter of material.Consequently, large numbers suggest large thickness.

Bikroelast CCI made of glass, which is coated with 2 sides of the polymer film.This is a very durable material that has been applied as the backing substrate.It is used and when it is necessary to make waterproofing basements, swimming pools, bridges.

Bikroelast EKP done on the basis of polyester, which is applied to the protection of a Coarse-grained, as well as the polymer film.It is used for arranging the upper layer of the roof.It allows you to get high quality coverage at a very reasonable price.

Bikroelast HSS made of glass fiber coated with coarse grit and a polymer film.This material is an economy class, it is used for the arrangement of the top layer of the roof, which has a small slope (up to 10 °).Despite the low price, it is different durability.

Bikroelast EPG - a type of lining material based on polyester with a polymer film protection.It features good flexibility and waterproofing properties.It can overlay from any bias, so this kind of bikroelasta used when creating vertical waterproofing.

Bikroelast TAP made on the basis of fiber glass, which allows the use of the material on roofs subjected to stress.Especially the result will be good, if you make a substrate bikroelasta CCI.Major sprinkling lends an attractive appearance roof.The photo is possible to estimate how this looks roof.

Features Use

With this material equips roofing, waterproofing is carried out ground and underground constructions.Durability operation bikroelasta linked to strict compliance with all recommendations for its installation.First, special attention should be the basis on which you plan to apply the web material.It must be thoroughly degreased, completely remove the dust, this usually take a bituminous primer.Secondly, we must not forget about the overlap when using the burner is fusing the coating.

In the video you can see the technology of these works.According to reviews, the size of the overlap should not do more than 10 cm. The advantage bikroelasta during installation is shown in the fact that it is easier to heat the burner than Technoelast Izol, rubiteks, Stekloelast, Filizol, Uniflex, which differ refractoriness.

Video