How to put a brick

Today the word "builder" has many meanings, and includes a lot of different specialties.Previously, such a word as "mason" was equivalent to the builder, as if a man could not build a house made of stone (brick), it could not be called a builder.

Core brickwork

For a man who has decided to build a brick house,you need to know how to lay bricks with their hands.This is very important, since it is impossible to say if non-compliance with all the rules on the reliability of the entire structure.Any bricklaying possible only if the foundation is strong and stiff.Before embarking on the construction of the wall, you need to put on the foundation roofing material in two layers.

to masonry with their hands look beautiful, you must choose its form.It should be borne in mind that the wall should be not only strong but also have an aesthetic appearance, have your picture.The easiest way, which is used by many builders - it is the chain clutch when each row alternates, and there is a difference in the half-brick.

Process bricklaying

to know how to lay brick, should be a little familiar with the information.You should first decide on a wall will be erected in one brick, one and a half or two bricks.Here, a major role will be played between a bunch of rows.If you look at the video available in the article, like putting a brick, it will be much easier to know where to start and how to link the series.

For this need and special tools: trowel, construction hammer, square, level of vertical and horizontal.As well as mixing solution tools.Stir solution should be enough to have enough for a few hours.Before you learn how to lay brick, you must learn how to mix the solution, since the quality of the solution will depend on how tightly will keep the wall.

Before laying a brick wall, you should lay out angles.This must be done using the vertical and horizontal level.If it does not lay out angles on a level, then the wall will curve.But the angles should be spread in several rows.When the wall will go up, and the corners should be raised higher.

When corners are lined up in several rows, then from one corner to the other stretched cord (fishing line), and the solution is placed on a foundation.And then on the cord is placed bricks.

If the cord is not well stretched, how exactly to put a brick - it is a question.Before each brick to put on the wall, his face a trowel to apply the solution, and only after that it is placed right next to another brick in the wall.

cord must be taut on the upper level of a brick.To make it fit tightly to one another, should put a little more of the solution on the wall and tap on the brick trowel end, aligning it under the cord level.He selected a solution trowel.

If a little practice, you can quickly figure out how to put brickwork, so that it was flat.Of course, not everything will turn out right, and a number of 1-2 will have to re-laid, but after 1-2 days, you can have is to do everything faster.

To understand the process of laying bricks with his hands, worth seeing once again the video - so the theory is combined with practice.The main such work - correctly exposed corners.

If you know which solution is put bricks, the wall will hold tighter.It all depends on the brand of cement: if M400, it is necessary to use one bucket of cement 4 buckets of sand, if M300, the 3 buckets of sand.Water is added and everything is mixed well, so the sand was not noticeable.

Video masonry bricks with their hands