Shelves on the balcony with his hands

Balcony is usually the technical room, which did not provide coverage.However, many homeowners zealous use it as a storage area, and sometimes even more recreational areas.In a particular case, for convenience of placement of things you can build shelves in the balcony.The work is simple, you can safely make a shelf on the balcony with his hands.

What can be done shelves?

On the balcony you can make open shelves, it is possible to make lockers with doors: one for a lot of creative thought.Stock shelves on the balcony you can see below on this page.Positioning the shelves should be such that they do not interfere with open doors to the loggia, is not obscured streams of light coming into the room, and do not overlap the fire door and fire escape.Very interesting option - production of shelves on the balcony under the window sill.In this case, the shelves are made shallow, so not much to narrow the passage, and the door can be done on runners, like wardrobe.

What will it take to manufacture the shelves?

If the balcony is not glazed, then there are certain requirements for the selection of the material: the material should be water resistance, do not deform under the influence of direct sunlight.Quite good strength characteristics is laminated chipboard.Then you need to take measurements and record shelves of the future size of required workpieces.Details can be drunk on their own if there is available jigsaw, you can use the shop, which sold chipboard.Many have additional services such as sawing.When buying particle board immediately need to buy parts for fixing the shelves: the corners at the rate of 4-6 per shelf and screws along the length shorter than the width of the CPD.

How to make shelves on the balcony?

is marking with a tape measure, square and a pencil on the wall.On the floor and ceiling strictly under each other are attached with screws to 4 bar, forming a rectangle, at a distance from the wall equal to the depth of the shelves, which will serve as the base frame of the rack shelf.Then the side walls are formed from chipboard shelves, screwing them to the side bars.If desired, can be provided and a rear wall of chipboard or thinner plywood.

shelf in the rack to stand straight, you need to initially perform an accurate layout of fasteners.On one shelf usually takes 4-6 corners.The distance between shelves can be made equal, and it is possible to provide the storage shelf for items higher.Corners are mounted on the side wall 2 and the rack 2 in addition to the rear wall.On hoisting the shelf mounting brackets and check it on the evenness visually or by level.If the shelf is level, then it can be attached to the corners.

If you plan to shelves and cabinets on the balcony to do with doors, the need still for 2 hinges on the door on the handle and a pair of magnets per set.Depending upon the convenience of the master representations can be done by a pair of doors on each shelf, several shelves on a pair of doors or for the whole rack (in this case it is possible to increase the number of loops).Doors can also be made single and double door.Designated loops are marked beforehand and hinges are screwed to the side wall.Next, secure the door to the loops and regulate their smoothness and density of closing.Then fasten the magnets in the middle and, in the last instance, fasten the handle.This is the main way to shelf unit on the balcony.

In most cases, the shelf on the balcony made the one side wall, which looks toward the street.The opposite wall of the loggia, in this case serves as a wall shelf.In this case, the bars are mounted on a wall in the ground mounting shelves.If a balcony lined with clapboard, it is logical to do and shelves on the balcony of the lining.Then the whole structure will look aesthetically pleasing and harmonious.

shelves colors

similarly possible to arrange the shelves and on the balcony for flowers.When the device frame and workpiece shelves shelves themselves for flowers takes less depth, as if the flowers will be in 2 rows to the back of the light will not penetrate.In addition, instead of the one side wall, which is located on the street side, it is necessary to make the framework of bars for fastening the shelves, as well as to not obscure the plant.Shelves for themselves who can skillfully handle the jigsaw can be curly.