Glazing of balconies with their hands

Everyone prefers to live in comfort, but not everyone has the opportunity to hire designers, to pay a lot of money for the repair professionals.In this article, we will open a topic such as the glazing of balconies with their hands, and that it is necessary.

should be noted that for glazing balconies not suitable any time of the year,therefore this issue should be addressed in the warm.

With options to photos and videos glazing balconies with their hands can be found below in this article.

First you need to select the desired and suitable style, budget and your preferences glazing materials .

materials for glazing balconies

For example, the cheapest option is aluminum windows .However, they have a high thermal conductivity, so practically applicable for glazing balconies.

If we talk about windows wood , they are eco-friendly, well-kept warm, but are expensive and difficult to install.

most common form and the most frequently used are PVC windows .They are well proven for the glazing of loggias.So now we tell you how to glaze a loggia with their own hands with the help of PVC windows.

Stages glazing loggias

Stage One .It is necessary to perform measurements.You also need to make sure that the balcony railing reliable, since they will serve as a basis.After this stage you need to make the drawing loggia.At this stage, the system is defined in one of the windows, that is, in the embodiments of opening the door and so on.

also need to check the level using the geometry of the walls.

Step Two .Before glazed loggia with a plumb or level should be set the box below and attach to the flow or parapet.After that, install a window sill, as well as tides and canopies.All existing joints are masked or is filled with a special foam.Do not forget that the finished length of the tide and the visor must be greater than the already finished construction of approximately 20-30 cm and the length of the sill -. Must be greater than the finished structure 10-30 cm

Thus, the basic preparatory work has been completed..

Stage Three .Then proceed to exterior waterproofing.Ebb should be characterized by low thermal conductivity, so in this case is not very suitable glazed loggias aluminum profile.Then isolate the inner side of the balcony.

Step Four .At this stage, hung casements, as performed by operation of the locking fitting.Further screwing opening limiters, pasted on the wall of a special masking tape, then carefully outside zashpaklevyvaem assembly seam.Fixing adhesive for use as a working solution.

plastic windows triple-glazed or single-chamber are now the most affordable option loggia glazing that will make your balcony a warm and comfortable.Bole addition, made of PVC windows do not require painting, they do not need extra care, and with all this looks very aesthetically pleasing.

Further it is possible to insulate a loggia.

There are different options for glazing balconies (stained glass, frameless, etc.), each has its advantages and disadvantages.

The following article, we suggest to familiarize with video glazed loggias .

Video glazing balconies with their hands