The lighting on the balcony

Due to the architectural arrangement of the balcony of his room can be functionally enhance and turned into a cozy "arbor" or aligning with the room, thus extending the living space.However, in order to turn into a reality conceived design of the balcony, it is necessary to carry out the wiring and make it great light.

How to make the lighting on the balcony?

Many of the townspeople decide to simplify the lighting on the balcony, installing light fixtures and connecting them in an ordinary extension cord.But if you are serious about the question posed in the first place it must be remembered that the electrification of the loggias must comply with all the requirements of fire safety regulations and be safe to use.

priority, is to determine the type of wiring, which can be hidden or open, after which it is embarking on preparatory work, cable laying and connection of electricity.

necessary equipment and accessories

To make the lighting on the balcony with his hands need to punch, voltage indicator, drill, dial tester, screwdriver, pliers and other construction equipment in the process.For the wiring of lighting, you must first purchase the appropriate power supply cable section, corrugation, switches, sockets, junction boxes, and proper lighting.

preparatory stage

Before prodelyvat Stroebe, should decide where it will do the electrical supply for lighting balcony: from the junction box or outlet.As the search for the junction box in the apartment, open it and spin can be problematic in the best way suitable outlet.In the case of powering off the socket elektrotrassa the apartment to the balcony will be hidden.So the next step in the creation of light on the balcony will mark the wiring runs and piercing punch cutting grooves.

Installation and laying of wires

Stroebe When ready, proceed to lay the cable (wiring must be copper) and smearing Stroebe asbestos.Then join the wiring flats and reliably insulated connection via junction box.At the same time hidden wiring involves drilling cutting grooves in the apartment and on the walls (ceiling) balcony.While open wiring on the balcony is electric cable fastening on the supporting structures.This type of wiring eliminates a number of technical operations, greatly simplifying cable installation process.Special corrugated tubes are necessary when connecting the light on the balcony.Their essence is to prevent a possible fire in the course of a short circuit.

Open wiring is appropriate, depending on the interior balcony.If the lodge room is planned to sheathe a tree, then open the wiring will be just right, because it is hidden under the skin layer.

lighting fittings

By the choice of lighting fixtures in the balcony should be approached from the practical side.If you plan to use the balcony as a separate room, a workshop or storage room, enough to mount a lamp.Another thing, when engineering construction extends the living space.In this situation, the role of lighting fixtures based on the possibility of full coverage, as in the photo.

designers recommend using electrical appliances to decorate the interior of area sharing a room.Depending on the ideas premises (work or relax area with sofa bed) Lamp must be different from their "family", embodying the new role.As shown in the photo in a variety of light boxes, spotlights in the suspended ceiling, wall or floor lamps can be used as a light on the balcony.And, most importantly, choosing a lamp, you must pay attention to its performance characteristics, since not every device is able to withstand winter frosts.

Photo lighting on the balcony