Condensation on the plastic windows

Once in the apartment repair is completed, it seems that your peace can not prevent anything.But there is one very unpleasant moment: during periods of cold weather condensation appears on the plastic windows.Many people think that this is quite normal and, in principle, the expected phenomenon, but in reality it is not so.

Why condensation on the plastic windows?

Causes of condensation on the plastic windows are different, so you need to see to it, when and how it appears.

There are three types of reasons, conventionally can be divided so:

1. Errors manufacturer and installer.
2. placement of radiators and a wide windowsill.
3. total humidity.

Most often, ordinary consumers are faced with low-quality manufacturer, which saves on materials.In such cases, the result of fraud makes itself felt in the first winter.Due to the fact that the manufacturing process has been somewhat disrupted, and there is a so-called heat reduction, which has as a consequence a bad result in condensation on the plastic boxes.

There is a second reason - the error of installation glass blocks.In this case, it is the workers made mistakes.Incorrect measurements and application of foam, the installation of a wide sill (at the request of the customer) - all of which can also lead to condensation on the plastic windows from the room.

There is a third reason - the high humidity in the living room.

How to get rid of condensation on insulating glass units?

1. Many people know that if you do not remove the cause, you can get a dangerous fungus and mold.To overcome these difficulties a party, in this case it is necessary to use a fan that will be able to balance the temperature.If you set the mild intensity of the fan scroll, then a few hours condensation on PVC windows disappear.So you normaliziruete air temperature in the room.

2. If this method seems you are ineffective, it is possible to use another method.Its essence is to improve ventilation.Usually it is sufficient to check the entire ventilation system, which is often clogged.

3. Aeration - the most simple and easy way that the people believe the best solution to the issue.So you can eliminate condensation on the plastic windows from the room fast enough, but the procedure should be repeated every day.So you reach that, the temperature at which condensation will not occur.

Remember that you are not affected by this problem, you should initially ordered plastic windows from trusted manufacturers and installation of glass should be trusted only to professional artists.