Doors made of plasterboard : features of manufacture

drywall increasing popularity today, and expands the scope of this finishing material.In construction it is used during installation of partitions and multi-level ceilings, leveling walls and insulation capital.Universal properties of gypsum board make it unlimited, and thanks to the low cost of raw materials used plasterboard, not only on construction sites, but also in other economic purposes.

Description material

Sometimes you want to diversify the interior of the apartment, make a note of originality, creativity and freshness.For example, to replace the old furniture to a more modern, making cosmetic repairs, or to decide on a capital redevelopment, dividing a large room with the walls.With the latter can successfully cope universal in its characterization and practical drywall.With it, you can not only isolate and delineate the space, but also to design the doors of plasterboard.

installation of interior doors is today a very popular service is largely due to the fact that the sliding doors made of plasterboard - it is quite a functional design that can also embellish the room and save space.

Doors made of drywall, photos of which you can see below, are presented in different stylistic interpretations, and I must say that they began to make quite often lately.

practicality and appearance of the door is not inferior to traditional designs, and in addition to the design of the interior space, drywall is also used as components of furniture.

Working with him is just, besides, it is lightweight and malleable material.No special skills for installation is not required, however, as a large set of tools.Install the door or partition plasterboard quite capable hands.

Easy-to-use material is moisture-resistant, and even can be used in the kitchen and in the bathroom.Align gypsum wall is not necessary, and doorways can be designed absolutely any form.

theory of gypsum board (plasterboard) easy to do absolutely any structure, it is important to comply with all the nuances of working with this material.

Features and benefits of the plasterboard structures

Why drywall is so often used in construction and domestic purposes?In fact, this demand is due to its unique features:

1. Installation finished walls of plasterboard does not require large financial costs, and raw materials are inexpensive.
2. Construction of plasterboard are characterized by high reliability.
3. modern design of any complexity drywall will help bring to life.In addition, it can be wallpapered and painted in any color.
4. any room configuration can be easily changed using the GCR.They are fixed with "dry", but because their movement is easy.
5. Drywall - the most environmentally friendly building material.Thus it is made harmless components used in the manufacture.
6. Light weight gypsum board as simple as the installation.
7. addition to the above features, this material has a higher sound insulation and energy-saving properties.It is perfectly "breathes" and maintains an optimum microclimate in the room.
8. Flexible gypsum plasterboard can be cut even with a knife.

drywall Disadvantages:

• almost all kinds of GCR absorb moisture and destroyed;
• with sloppy transporting this material, it can crumble;
• on plasterboard walls without metal frame is better not hang heavy objects;
• GCR sometimes difficult to climb the stairs of a multistory building.

Forms walls of plasterboard:

1. Deaf.Their peculiarity is that these partitions are mounted solid sheet.This cost-effective option allows you to draw interior walls in different modern styles.
2. partitions with glazing.Usually used in the regeneration of offices, banking companies and other organizations, where all elements of the building envelope should be visible.

door of plasterboard with their hands

before a door of drywall need to choose the right place for this, and prepare the doorway.To do this, use the wooden doorway, reinforced metal profile.The only way to stiffen the frame.The main tool to create the framework you should use scissors, metal, screws and screwdrivers.

manufacturing stages:

1. Plasterboard interior doors is better to choose not less than 9.5 mm thick.For these purposes will fit even the remains of the material, since all the joints can then be filled.

to work you will need:

• plasterboard;
• knife, pencil;
• plane to the edge;
• screws (25 mm);
• metal perforated angle.

Using a pencil and a ruler make marks on the plasterboard, then cut it into pieces and align the sections of a plane.Steering on both sides of the frame fasten screws gently so as not to damage the fragile drywall.The edges of the plaster on the need to fix a perforated metal area that will prevent damage to the door during operation of the doors.

1. When the area is dry, you can start finishing.Prime the canvas align shpaklevalnoy mixture.To the layer of putty are not cracks, treat joints grid-serpyanku.Cover the door can be plasterboard panels, painted or tiled.But before that, make a loop on the door and do the holes for the necessary accessories.If you want to further insulate the structure between the sheets giipsokartona, you will come to the aid of such materials:

• foam;
• wool;
• foam;
• polystyrene.

1. Installing a traditional hinged door is elementary, but to mount a sliding door, it is necessary to consider some nuances.At the hardware store buy a special sliding mechanism with instruction.Rail to the door usually attaches to the full width of the floor opening.
2. Once the door is in place, you can attach the trim and the necessary accessories.

Sheathing doorway drywall

Today many domestic masters are wondering how to close up the door plasterboard.This is necessary in cases when it is necessary to get rid of the door opening or remove it altogether.In order to make things right, we first need to dismantle the old door.

1. Remove the door frame with a cloth.
2. The resulting smooth out bumps in the opening and align putty.
3. on the floor under the opening in the wall, set the guide profile of the metal.Attach it is necessary so that the drywall sheet has subsequently played for the plane wall, it should be on a par with it.
4. Then, on the same principle, attach the top rail.
5. Two metal rack set on the two edges of the doorway, and one in the middle.
6. to all profiles fixed with screws, attach the cut GCR.
7. On the other side of the wall do all the same, that is the doorway to sheathe the need for both sides.
8. At the end joints of the finished structure can be neatly putty and wallpapered.For more information about how to make the door of the drywall, you can see on the training video.

plasterboard partitions with their hands

Before starting work on the production of plasterboard partition walls is necessary to consider a number of recommendations from the experts:

• determine the exact location of the design, calculate and purchase all the necessary materials;
• according to your drawing make the marks on the floor, on the walls and ceiling.Only then can you start to work.

Collect partition for a room is quite difficult, it requires certain skills and knowledge.Use the building level and a centimeter to obtain a flat wall.Once work on the plating metal profile plasterboard finished, start to finish.You can paste over the partition wall-paper pre-treated joints mounting tape or putty.

same technology made efforts to reduce the doorway.For this and other assembly work should be treated with great responsibility, because small errors can lead to damage to materials and money spending.