Build Daily

Construction Site

August 12, 2017 18:06

Glue adhesive film for furniture , doors, walls

Glue adhesive film for furniture , doors, walls

If you know how pokleit adhesive tape, you can transform the interior of the apartment, at a cost of a minimum of means.

Adhesive tape became popular not so long ago, but quickly won recognition sincedecorate with it you can literally any surface: you can stick it on furniture, doors, wallpaper, windows, etc.

From the article, you'll learn about the features of self-adhesive film, which film is better to choose for different surfaces and on the rules of working with this material on different surfaces.

instructions and videos to help you transform the interior of the apartment with the help of this material.

Features and types of material

As mentioned above, the self-adhesive film produced for a variety of surfaces.

All film types are almost identical and are made with the use of adhesive tape technology, which makes this stuff at the same time similar to masking tape and wallpaper.

Self-adhesive film has the following characteristics: resistance to moisture and high temperatures, the ease of working with this coating, a large selection of colors and pattern, easy maintenance and low cost.

material suitable for almost any surface: it can stick on the ceramics, wood, plastic, wallpaper, plywood, glass, etc.

Most often this coating can be seen as an element of the decor, which is applied to the furniture, wallpaper and doors.

Variety of colors

If we talk about the total or partial otkleyke walls, it is important for the bathroom and kitchen in the work zone area.

explains this choice is simple: the film does not stick to dirt, easy to clean and sufficient moisture resistance, making it ideal for the bathroom.

Sometimes you can see the cover and in children's rooms, becauseIn this case, you can not worry about what a child will ruin the wall coverings.

Of course, it may give way to a few wallpaper on the decorative properties, but with a wide variety of colors and patterns on the material, and this problem can be avoided.

Stained glass film will be a wonderful decoration for the door - all the more so glued to the glass it is not difficult.

only visible lack of it - the material should be pasted on the wall or furniture completely smoothly, that there are no bubbles and irregularities, asThis will not only make it unattractive appearance, but also worsen the grip, and soon it will begin to depart.

Before you buy glue and material necessary to determine the surface on which it will be located.The design and color of the film is largely dependent on this.

For example, furniture often paste only certain elements - such as images, or colored part of the film, which will be able to "revive" the old furniture.

Another option - the protection of furniture - it will suit transparencies.If you are going to glue the material on the windows, you'll like stained glass with a mosaic pattern.

for living rooms, bedrooms and children can choose self-adhesive graphics that fit the base coat walls and able to give the original interior.


Since one of the main advantages the material - easycare and moisture resistance in the bathroom and kitchen walls can paste over them completely, or only those areas that are most susceptible to contamination.

Remove dirt from the film is very simple: you can use any detergent and warm water, and if contamination is strong, it will help ethyl alcohol.

strongly not recommended to rub the film or to use highly concentrated powders and chemical cleaners, asthey can damage the outer surface of the material.

glue material

To use this cover, you will need the following materials:

  • line;
  • pencils;
  • scissors;
  • knife;
  • felt trowel
  • building hairdryer.

But before you start gluing material, you need to bring order to the surface.First remove the old paint and glue, which is located underneath.

Wall must be very thoroughly cleaned, and then degreased using gasoline or alcohol and dry well.Best of all the material will be kept on a smooth lacquer coating.

If the surface is matte or rough, before pasting it can cover the first primer or polyester varnish or adhesive methyl.

If you glue the film on the plywood, wood, particle board, fabric or plaster, then any of these surfaces should also be prepared - cleaned of dust and dirt.

can also treat the surface with a primer or sealer for better adhesion to the material.

If the film is stuck on the glass or metal, the surface is necessary to moisten a bit, otherwise the coating will not stick to it.

Because often it is not glue paintings and small pieces, behind it there is marking with centimeter increments.


Such markings are provided with virtually all materials, however, if you bought a film without it, the layout needs to be done on their own, so that you can properly trim it.

Cutting better special knife or scissors.When cutting, leave 1-2 cm margin.

How to cut the material depends on its pattern: if the picture is made up of tiles, it is necessary to cut at the seams, and if the pattern rapport, then you need to cut it from the front.

Gluing material in general is not difficult, but you have to be very careful and do not take the time to cover laid down smoothly and does not puff up.

Get ready for the fact that the seal, for example, the entire surface of the walls of the bathroom will be harder to film than to put it on the glass, door or furniture made of wood.

Once you have prepared the pattern, carefully separate the material from the backing and apply sticky side to the surface.

not need to be glued tight immediately, at first simply apply the film and see how it fits the size and shape of the selected surface (first stick should be only the first 50 mm).

If everything is OK, then gently spread over the surface of the film, immediately smoothing it with a dry cloth of the soft tissue.

better to see the whole process of gluing on the video, if you've never done this.

to the material is not a bubble, it should be smooth from the center to the edges, just as you do when kleite wallpaper.

If you notice that the film is swollen, then immediately align it to the surface, until it does not stick to it permanently.

If you kleite film in the bathroom and a large work area, then it should be applied to the prepared wall, smeared with glue for wallpaper.Stick the tape until it is dry, then just smooth the fabric cloth.

Stained glass film, and the film-shaped images which are applied to the glass doors and furniture, stick to the surface very quickly, however, and glue them much easier, as long as the material has been placed exactly.

to cover kleilos too fast, can be treated with the surface of talc or powder.

Stained glass glued film only on the glass or metal water-wet.You can also add to the water a soapy solution - so it will be easier to adjust properly to the surface of the film.

After a glass or metal with naklennoy film just wiped with a dry cloth.

Adhesive tape is well fixed on the wallpaper.Rather, for them you will pick up smaller images, rather than full-fledged web.Gluing Wallpaper material need, following the standard instructions.