Laying laminate your videos hands.laminate stacking technology

If you have decided in his apartment lay laminate flooring yourself, then you can be understood, because it is laminate flooring still quite relevant in our time.Laying laminate your own hands is not complicated, and the price is acceptable.Now in stores a huge selection of laminates.You can choose to suit every taste and interior of your apartment.He always looked harmonious and beautiful.Decide where the installation of the laminate floor will be made.The bathroom is not desirable to do so.The coating comprises a laminate wood, and as you know the tree is sensitive to moisture.Do not forget about it.Website renovated apartment with his hands prepared a good instruction on the laminate stacking technology with photos and video.

Laying laminate own hands

To begin with we want to draw your attention to the fact that the laminate is put alone is still quite difficult, it is desirable to carry out at least a couple.

To start pick up the color of the laminate, and then determine its class.Then you have to decide how much it is necessary for laying on the floor in a specific room.In one bundle of 10 boards.They are designed for 2 square meters.Let's assume that 12 square meters will need about 6 packs of laminate flooring.Buy, in any case, with the stock, as it is likely accidentally damage the board during installation, or to cut the board on the wrong side, especially if you stele it on the floor on their own but still the first time.This widespread cases, especially if you are new in this business.In short laminate pack extra never hurts!Find out how much you need packs of laminate can be a free online calculator.

Before you start laying laminate flooring with your own hands, and correctly, you need to prepare very well the very foundation on which you will lay it before this carefully align the floor and walk a vacuum cleaner.When laying the screed to do or what any other operation is not necessary.It will be enough that you have a flat floor surface without strong mounds and spikes.

If you have a wooden floor, then go to the right places of the grinding machine, and if the floor creaks, drive a few nails in the ground bonding (near previously hammered nails may become loose old).But you can not utrudnyatsya - you can lay laminate linoleum, if there l most importantly, what would it be with a smooth surface.And if you want to, that would be fine and everything was perfect, then it is advisable to carry out the screed.

Before starting the robot, cook all at once the most necessary tools.First of all it is: a roll of polyethylene foam (base under laminate) how to select it, click here.Need more jigsaw or a saw, a hammer, a piece of wood 15 - 20 cm., A tape measure and a pencil.You can use an electric jigsaw - cut laminate by hand is not so simple.

technology of laying laminate own hands

Most people believe that in the laminate stacking technology to the floor is no big deal, and it is done pretty quickly.These are the people who do not uchuvstvovat personally in this matter, and hearsay, or simply by seen how others do it, watched the video.At first glance, everything is simple, come from the board and folded together and stacked on the floor.However, we warn that the laying of laminate your own hands, and even more so for the first time takes you pretty more effort and time than you can imagine.

Let us laying laminate flooring technology on detail.Boards bonded to each other on all four sides of the ridge on the principle - the groove, in other words, the crest of one board is inserted into the groove and firmly bonded to the other by means of a hammer.For details shown.

Widget from SocialMart

The technology itself is quite simple, you can start from any side of the room.Put the laminate perpendicular to the window, so will not be noticeable joints between the boards.In the beginning you need to reach the substrate along the wall in a row, because if you place it on the floor around the perimeter, it will be very disturbed.Then take a laminated board and spread them along the wall strip and bonded to each end side.Customize hammer board that they abut each other.

To do this, take the piece of wood, and set it by the end of the board at the end face, only not to the ridge and on top of it, so as not to break the ridge.Then customize the board to each other, lightly tapping with a hammer on the bar.Abut End boards in the wall, leaving a gap in the thickness of the laminate (for this fit pieces), the main thing is not to overdo it, otherwise you can damage the laminate board (in such cases, and the need reserve).That is how we spread and customize the board along the wall.At the end of the board should be cut to size.

That laid the first strip.Press it as tightly as possible against the wall, inserting before it wedges on all sides, about 1 cm. For such purposes can be used all the same cut pieces of laminate.

second strip fold in the same way, just before it cut off a half-laminated board and start to put it.And just as the following can be started again with the same board.

Thus, it should turn out that the laminate floor is like a chess board, which looks very nice and original.It is in this laying laminate increases resistance to driving forces, and he will not "walk".

How to lay laminate flooring yourself

It was during this second clutch settles board.Tight fit together.Then take the neat strip and the strip insert slot in the comb which is pressed against the wall.This must be done at an angle of 20 degrees.Squeeze tightly, and then push the top, only gently.Band of boards should fit a comb enter into the strip groove, pressed against the wall.Do not worry if something does not work, try again.In the process of laying you will get it much faster and more confident.Most importantly, do not forget that the band should be drawn up in such a way that would not accidentally messed up and started putting the other party.That is, the comb must enter into the groove rather than in a groove or recess in the crest of the ridge.The video below shows how to lay laminate on the floor with your hands, take a look.

If between the strips of laminate have any gap, take planochki, hammer and customize to each other, lightly tapping along the strip, most importantly in the top of the groove, so as not to damage it.

That's the way you need to collect and connect all of the laminate strip, urging them to each other around the perimeter.Most importantly, do not forget to insert wedges between the wall and laminate somewhere in the 1 cm. The most difficult and not easy, this is the last band.It is firstly necessary to vymeryat accurately and neatly cut, and secondly, when the last leaf insert it is not convenient to fit tightly.To do this, take a strip of iron or profile, the edges bend in opposite directions, so that on one side fold was 0.5 cm, and the other (the opposite side), about 1 - 1.5 cm. Strike hammer.So self-made "tool" will be easier to adjust the last leaf.

How to bypass other obstacles, such as a pipe, door sills think it is clear, take the jigsaw, vymeryat and cut.Laying laminate with his hands on the finished floor.I had some work to do, but have saved money and learned stacking technology.If that is not clear - see the video and ask questions in the comments.Thank you for attention.And if you have damaged laminate, find out how to repair his own hands, then this article is just for you.

Laying laminate with his hands video