Build Daily

Repair Video

August 12, 2017 18:08

Installation of electric floor heating Video

Installation of electric floor heating Photo Installation of electric floor heating with video examples.

Underfloor heating is the preferred choice when deciding on the heating of a country house.Doubtless its advantages are easy laying and maintenance reliability.See more detailed instructions clearly where we discussed the installation of electric underfloor heating with their own hands with a photo as an example.Begin work necessary to the floor layout.Underfloor heating does not fit in the place of installation of furniture or plumbing.It is also determined by the place in the sensor, taking into consideration that it should be between the loops of the heating cable.

then made shtroblenie walls under mounting box.From her prorubyvaetsya punch groove in which the corrugated tube is laid, which contains a temperature sensor and cable.The tube is fixed alabaster or cement-sand mixture.The end of her carefully sealed with adhesive tape.

At the bottom of the wall is attached heat insulating tape 10mm thick.Now on the floor stacked sheets of insulating material - polystyrene or Penoplex.Since under heating cable can accumulate condensate, with the purpose of sealing the top polyethylene layer placed overlapping.Seams are glued or soldered mounting tape building a hairdryer or a blowtorch.

Widget from SocialMart

now need to create a base for the installation of the heating cable electric floor heating.To do this, make a tie.Next should be put mounting tape, fixing it with nails or screws.The distance between the rows of mounting tape is about 1 m. It is necessary to check the resistance before laying the heating cable.It must match the nameplate data.The heating cable should be laid in the clamp mounting tape and fix them.Lots of cable in any case must not intersect or touch.The optimal distance between the two segments of the cable is considered to be 25 - 35 cm cable loop value should not be less than 5 cm Also fix the corrugated tube with temperature sensor...We get into a wiring box ends of the heating cable.

Installation of electric floor heating came to an end, watching a video example.Now we have to make a cement screed thickness up to 4 cm After coupler can withstand the weight of a person. (Usually 3 - 4 days), we start working with electrical wiring.The wiring box set the thermostat.This plant in the special socket thermal sensor cable, the ends of the heating cable, the power supply wires.Also it is necessary to provide the circuit breaker device.After the final drying screeds put the finishing coat.Renovated apartment with us will be faster and cheaper!

Installation of electric floor heating Video

Video instructions for installing floor heating TEPLOLUX.See necessarily.