Acrylic emulsion - friendly wizard decor

acrylic emulsion for walls - everything you need to know

produce emulsions, water-based, without the use of toxic chemicals.paint components are not dissolved completely, and are as it were in a suspended state.Therefore, after application to the surface of the water evaporates and the colorant is, forming a thin polymer film.

acrylic emulsion for walls have a number of indisputable advantages :

• thanks peculiar to their molecular structure, they breathe;
• level of humidity does not affect the coverage and operation;
• equally effectively used for external and internal works;
• staining passes easily and uniformly (due to the formation of water-based thin film);
• dries quickly;
• acrylic emulsion is not dangerous to humans and the environment (does not contain toxic substances), does not cause allergies;
• has remarkable characteristics of the fire;
• painted surfaces are easy to clean and preserve the original appearance of 15 years.

Acrylic emulsions have several varieties. Akrilosilikonovaya

paint used in the manufacture of high-quality compositions for the exterior, does not form a foam, and converted at a low temperature in the film.The film has a gloss and the ability to self-clean, used to create a protective layer, for exterior and interior paintings. styrene acrylic paint durable and looks very solid.Her coat shiny, glossy can say.And the properties of the coating are as follows: water resistance, scratch resistance, resistance to alkaline medium.So often stirolakril used for impervious coverage.Clean vodnoakrilovaya paint is ideal for decorative and applied works.

There is also a modified acrylic emulsion , its application is typical for work on plaster, aerated concrete, brick, chipboard, concrete, wallpaper, plaster, recommended for wet areas (bathroom, kitchen).

emulsion for walls are not capricious, but still ...

should first prepare the place of employment and subject to application of the emulsion.When the primary color of the surface must be cleaned of dust.The emulsion is applied to the wall only to a dry basis.Prepare the surface - fill putty flaws.Oshkurte until completely smooth state.Remember: acrylic emulsion does not hide the shortcomings and emphasize their!

If staining is done not for the first time, well clean the surface of the blisters and the remnants of the old paint, walk cloth, again locally walk putty and sandpaper, and in the end to remove dust.Before applying a general coat of paint paint plastered areas.After preparation of the surface is recommended to apply 1 coat Olympic Acryl Grundierung primer.

tool list is not great and is available at any hardware store: roller, brush, spatula.

Undertake directly behind the acrylic emulsion

prepared substrate must be sound, dry and free of dust and grease.Properly primed surface will look matt.When fungal lesions, the presence of mold should be cleaned by hand and disinfected surface impregnation SUPER-DOM .Before applying the paint (emulsion) to be mixed thoroughly.If you think the paint thickish, add 5% water.Stir.

recommended to cover the walls in several layers, typically 2 or 3. The first coating the walls of untreated dilute the paint to 20% water, depending on the moisture permeability substrate.Let's take the opportunity to dry each coating layer.If you have to paint the old surface of the paint is better not to be diluted.

The paint is applied by brush, roller or a special spray.When spraying necessarily zaschischitite eyes and the respiratory tract by special protective equipment (goggles, dust mask).Paint itself is not toxic, but do not be too careless.When applied to the primed surface of the emulsion to put 2 layers, and on unprimed - 3. Each layer of paint dries about 2-4 hours, so plan out your time in advance to work.