The thickness of the floorboard - what is its importance in the coating operation ?

Parquet board: Characteristics

Parquet comes in two types: multilayer and solid wood of high quality, luxury wood (no glue).If we talk about the massive, then its design is reminiscent of the classic parquet, but of greater width and size.Considered the most durable flooring. multi-layer usually consists of three layers.

The bottom layer is made uniform (coniferous tree).Its thickness should be about 1.5 mm.The second layer is laid in the form of strips of softwood (spruce, pine) is perpendicular to the bottom.Its value is 8-9 mm.This arrangement of the fibers must be secondary in order to increase the mechanical reliability, as well as resistance to changes in indoor climate (moisture, temperature).

The top layer is made from noble trees.Its thickness is from 0.5 to 6 mm.The larger the value, the more it can be sanded.Used are very different types of trees (depending on the destination premises) for this layer.On top of the oil is applied to any flooring composition or varnish.It also affects the hardness of the wood flooring.

this material is made according to specific standards.Parquet board, whose dimensions are 180-250 cm (length) and 1,4-2,2 cm (thickness) , manufactured in accordance with GOST.The width of the floorboard should be about 14-20 cm .

Parquet: advantages and disadvantages

compare massive floorboard from multilayer. The advantages of multi-layer parquet board include: its resistance to moisture and temperature extremes.It endures more resistance to chemical effects (although the same is to be careful).It is placed

flooring is easy.No need for special service staff.To carry out the flooring can be their own hands.And, of course, one of the main and its main advantage is the environmental friendliness and the "warmth" of the coating.On this floor will be nice and comfortable to walk.

Disadvantages parquet boards lie in its lower abrasion resistance compared with solid board.Especially, if the top layer of very thin.In these cases it is difficult to repair the flooring.The greater the topsheet (10 mm), the more frequently (2-4 times) it can be sanded.The service life of the floorboard under such conditions can be up to 12-15 years.

Types floorboard

The most common criterion for division into types is the number of dice.That is perhaps one-, two- and three-way .The first consists of a single die.Available in both monochrome and with a distinct pattern tree.Two-way has two dice, which are produced in the shortened and elongated form.Shortened suitable for medium and small spaces for large elongated.

Longstrip, respectively, consists of 3 dice, which are arranged randomly.The colors of these plates can be quite different - from the simulation of dark to light wood.If the question arises - what better flooring?It all depends on personal preferences and design.It is solely a question of the ornamental.

On the basic standards GOST 862.3-86, depending on the base of the structure, this material is divided into: AP-3, AP-2, AP-1. AP-3 is based on a dual layer, wherein the layers are connected perpendicularly to each other.Td2 - based on a single layer.PD-1 is made on the same basis, which is assembled from squares arranged perpendicular to each other.