Build Daily


August 12, 2017 18:07

The varnish for parquet water-based coating for better protection

Types lacquer mixtures

Lacquered flooring can be quite different compositions.They are divided on:

  • technical characteristics (degree of fluidity, the viscosity, the method of application);
  • chemical composition (water, polyurethane, formaldehyde-based);
  • gloss (gloss, matt, satin-matt, semi-gloss);
  • performance characteristics (resistance to light, mechanical stress and other external factors);
  • environmental impact (possible utilization and harmlessness to the environment);
  • parameters affecting the appearance (degree of transparency, the possibility of staining the wood).

Today, rarely a dilemma - how parquet lacquer coat? On the market there are a huge number of species mixtures from various manufacturers.Moreover, if you want now to put on transparent flooring composition, then the next time you can use a liquid with a specific hue.But more often the question arises, - what to choose parquet lacquer on the chemical composition?Therefore below describe the main group, their main advantages and disadvantages.

varnish for parquet water-based

varnish for parquet water-based, in essence, is a water-soluble, quick-drying varnish for parquet (drying time which may be 2-3 hours).Its main advantages include excellent adhesion characteristics.That is why it is often used to cover, including, wooden substrates, where it forms a viscoelastic, transparent layer.

almost no smell (or its minimum count) allows the use of the composition in completely different areas.Plus, it has a flame retardant and fire safety.The disadvantage of these formulations emit their low abrasion resistance and therefore a mixture initially put some additives.

For floors with high load in the glue added to the polyurethane or polyurethane-acrylic dispersion.Also, the composition has a negative manifestation when gluing joints of parquet strips (its side parts).A high humidity are very capricious, and therefore requires compliance with certain conditions of work (moisture content should not be less than 50%).

polyurethane varnish for parquet

polyurethane parquet lacquer is also called anhydrous composition which may be a two-component and one-component (DD and PUR-mixture).Plus, it can have a different basis - urethane, acrylic, using solvents.Drying takes place by evaporation of the solvent.On the surface, forming a dense, elastic film.

of the main advantages can be identified by its simplicity microclimate of premises (in contrast to the previous composition).Also it has excellent adhesive properties and is suitable for areas with strong mechanical load (shops, cafes, restaurants).The Braves and exposure to chemicals (cleaning agents).

Plus, he has light and heat-resistant and well sizing joints strips.This is its advantage over the water varnishes.The downside, perhaps, is that over time, the upper film may fade and turn yellow.And, of course, it is quite an expensive product.

Priming paints

are used for the purpose of wood insulation, improve adhesion.However, before application of the primer composition should check its compatibility with the floor (particularly worn areas).It is also important that the primer lacquer were made and on the same basis (e.g., water) and from the same manufacturer.Typically, the packaging is written with some types of mixtures have compatibility.

composition has thixotropic properties, which limit the absorption composition in the floor surface.Because the varnish for parquet consumption is significantly reduced.Apply it on the cleaned and even surface along the fiber flooring.Drying time is from 15 minutes to 3 hours.It all depends on the absorbency of the parquet flooring and the type of mixture.

This parquet lacquer, odorless and colorless, which adds to the benefits of the operation.Among the other advantages distinguish the ability to protect from moisture and temperature changes, as well as the durability of the coating.

Note! In order to know exactly whether you need this primer for parquet, consult with a specialist.After all, much depends on the conditions in which the floor will be operated.