Textured rollers - makes the interior more interesting

Structural roller - and device groups

tools What is this tool?Its design is simple enough.Depending on the type, the roller cylinder can be plastic, wood or metal.As an absorbent coating use a variety of natural and synthetic materials.The cylinder fits over a curved metal rod, which is mounted on the handle.

rollers in their purpose are divided into several groups.The first, second and third groups are designed to work with paints and have their lettering: BM - with fur coating;VMP - fur, for painting the flooring;BMY - used for applying paint to the surface of the concave corner.The last group - the EP, with a polyurethane foam coating is used exclusively for work with water-adhesive materials.

Textured rollers - we understand with species diversity

How to use this tool, and where is it used?Surface structure (relief) is in the form of rollers of different patterns.Their very name suggests that it is intended to create the decorative coatings.To create on the surface of most uniform pattern, structure roller is necessary to roll in different directions while being careful to comply with uniform pressure.

structural work roll is forming on the decorative plaster surround the figure.There are two kinds of tools: Soft - tissue or foam rubber and hard - rubber.The textured rollers are used if necessary to align the surface coated with liquid wallpaper.

Note that larger texture designed for large areas.In small rooms is better to use a fine-grained pattern.

most frequently rolls with a textured surface applied to create a uniform relief pattern on wet plaster, its depth does not exceed 5 mm.They are made of wood, linoleum or rubber.To achieve a textured effect using figured roller.To make it possible even to yourself.To this end sleeve surface should wrap filament at several locations.

If you have a roll of foam, cut with a knife on his easiest surface pattern.Roller structural rubber is usually used indoors for the application of dispersion paints.With their help form a coating with a pronounced relief structure.

As structural work roll - all the secrets of a successful interior

should not be used for rolls too large, because with their help, it is difficult to achieve a uniform distribution of paint on the surface.To avoid water stains, before painting tools should be carefully unroll in a special bath.If you do not have it, you can use a sheet of plywood or corrugated iron.As a result, the required amount of ink remains on the instrument.

Never use the same tool to work with different types of dyes.In an extreme case, you can make a textured roller with your hands.As is known, such a tool is practically impossible to work in tight spaces.Therefore, all corners, surface at the architraves and skirting boards need to pass a paint brush.

Typically paint is applied on the walls from top to bottom, and on the ceiling in the direction of the incident light.So you will be easier to notice small errors.Paint roller structural conducted in the same manner.Apply the paint stripes or lasami, preferably with an overlap by a few centimeters.

At the beginning of the paint is applied thick maximum, after which it is rolled out with a roller.With each pass the pressure on him is gradually increased.In this work, the main thing, as carefully as possible to shade the paint.If you find gaps, then this place should be repeated painting.

Experienced painters paint is first applied with a brush, then roll it carefully rolled.In order to understand how to work the structural roller, may be to start to practice on a piece of cardboard.And only then proceed to paint the walls.After the tool works should be thoroughly cleaned and placed in a container and pour the paint, and then tightly wrapped in plastic bags.