Build Daily

Plumbing

August 12, 2017 18:06

Bath acrylic , steel or cast iron ?Choosing a bath

Today the bathroom is available in each apartment.In it man is not only clean, but also to rest.It is therefore very important to correctly and responsibly approach the issue of choice of baths.It is necessary to take into account many factors.For example, the material, durability, hygiene and comfort.To know what is better to choose a bath, will tell you about all the advantages and disadvantages of existing products.

Content

  • steel bath
    • steel bath Features
    • How to choose the product
  • cast iron bath
    • Features a cast iron bath
    • Tips for choosing a cast-iron bath
  • Acrylic bath
    • Features acrylic baths
    • How to inspect the acrylic bathtubs
    • How to choose the optimal size
  • Bath in cast marble
  • Conclusion
  • How to choose a bath: video

steel bath

1396424990_kak - pick - bath

Featuressteel bath

If we consider such an option, it is best to buy more expensive products because they tend to have thicker walls, which are much more difficult to deformation.The minimum wall thickness of such a bath should be at least 3 millimeters.In addition, you should pay attention to the weight of the structure.Reliable bath should weigh 35 to 50 kilograms.Lighter variants have thin walls, which is undesirable.

Of the advantages of steel products can be identified as follows:

  1. quality steel enamel baths does not flake, asis applied at high temperatures.
  2. Easy transportation and installation.
  3. relatively low weight.
  4. steel as the material has high plasticity index.
  5. Large selection of products.

steel bath has its drawbacks:

  1. have cheap products possible deformation of thin steel walls at high load.
  2. Poor keeping you warm, because the steel cools very quickly.
  3. Noise, which is why when pouring water can be heard ringing.

Despite the presence of significant deficiencies steel products, many of them can be resolved on their own, having resorted to some tricks.Today, the sale is a special polymer coating, which reduces the noise of the water when it set.However, its price is quite high.More sound insulation is recommended for plunge ( "Utopia") bath in the sand about 1/3 capacity.In addition, some models manufactured in Europe the bottom lined with rubber seals, eliminates noise.

can be set under the bottom of the tub extra support.Then the space between the floor and the bottom of the product to fill with foam.Only this will need to buy at least four standard container with foam.Furthermore, such a stand will hide using ceramic or plastic panel.Remember, not everything depends on the type of bath, but also on its quality installation.

How to choose the product

pick - a - bath - 10

  1. When the question arose, how to choose a bath in steel, then you are sure to pay attention to the thickness of its walls.It should be at least 4.3 millimeters.If the material is thinner, the product may under the weight of a person's weight to deform.
  2. Moreover, steel bath should have a weight of not less than 30 kg.lighter weight product would sag under the weight, which is why the enamel can crack.
  3. Also be sure to check when buying coating quality.It should not have flaws and defects.
  4. Action documents should provide the warranty service life of at least ten years.
  5. To the bath was more convenient, even when selecting desirable to immediately check its depth.The optimal value is considered to be 500-600 millimeters.
  6. Also important to assess the depth of the product length.It usually depends primarily on your height.The optimal value is considered to be 1600-1700 mm.
  7. Modern steel bathtubs have a high-quality enamel coating, which is why their appearance is very difficult to distinguish from iron versions.But it must be said that the steel construction is stronger than acrylic.

cast iron bath

What - bath - select --- acrylic - and - cast-iron

Features a cast iron bath

From advantages of cast iron tubs can be identified as follows:

  1. They are not susceptible to vibration, virtually noiseless.What makes the sound of running water will be muted.
  2. easy to clean.
  3. relatively low price.So buy it can afford each.
  4. durability and strength.
  5. resistance to corrosion.
  6. sufficiently high heat capacity and low thermal conductivity, so that the water cools off after heating is not long enough.

Cast iron baths are not without drawbacks.Among them stands out the following:

  1. large mass, which can cause difficulties in installation and transportation.
  2. enamel bath is vulnerable to shocks.
  3. All products are similar to each other.

Tips for choosing a cast-iron bath

Ванна-оформленная-в-стиле-модерн-или-ретро-может-стать-украшением-комнаты

  1. Even choosing the most simple cast-iron bath, it is necessary before going to the store to remove the necessary measurements.Dimensions of purchased products must conform to the dimensions of the bathroom.
  2. regard to the design width, it should be slightly smaller than the size of the doorway.Otherwise, it just will not come back.Otherwise, it is necessary to remove the door.
  3. Equally important is the depth of the bath.This is especially true for old small apartments.
  4. Be sure to pay attention to enamel coating.It should be smooth and free of scratches.When present, the deformation of the protective layer may occur in the future.
  5. If the bathroom floor is uneven, then the product must be the legs, which can be conveniently adjusted.
  6. It is desirable that the bath had anti-slip coating.This is especially true if the product is purchased for an elderly person or a disabled person.In this case, it is also important availability of convenient handholds.
  7. choosing a particular product, it is best to give preference to designs from well-known manufacturers.

As is known, cast iron tubs are made by molding.Because of this, they can be obtained quite heavy.At the same time, this makes them one of the most durable.Thanks to what the shape and design of the product can be maintained even under high loads.As indicated above, the cast-iron baths are highly resistant to corrosion.This fact is the main reason for their long service life.Bath made of cast iron can last for about half a century.

Acrylic bath

Features acrylic baths

1953

Advantages of such products as follows:

  1. retains heat well, so the water does not cool down for a long time.
  2. When dialing water almost inaudible noise.
  3. smooth surface that does not slip.
  4. material allows the bath to make any form.Thanks to what has been available many models even custom design.
  5. Minor damage can be repaired.

acrylic baths stands out the following shortcomings:

  1. not discharge it in the water after washing colored things.Otherwise, the bath can always be painted.
  2. Over time, when you use tap water acrylic products white yellow.Therefore, it is desirable to choose color options.
  3. relatively high price.
  4. walls scratched acrylic products more than other types of baths.

How to inspect the acrylic bathtubs

pick - a - bath

  1. First of all, you need to determine the thickness of the acrylic and reinforced layer.This can be done using a conventional flashlight.Although the exact value of this method will not work.We need to take an ordinary flashlight, turn it on and make close to the wall of the bathroom.If light is visible on the other hand, it means that she is too thin.
  2. More should knock on different places on the body.Dull sound indicates that the strong bath.
  3. Also, if felt a sharp chemical smell, it means that this model was made of cheap materials.it is not necessary to purchase a bath.
  4. Spend hand over the surface.It should be no dents, scratches and roughness.If the assurance of Seller "bumps" are a feature of the material, you should not believe it.On the plastic should be irregularities.
  5. More should pay attention to the design color.It should be uniform.If there are stains, it says the poor quality of the product.
  6. sure to check the bottom of acrylic bathtubs.It must be absolutely smooth.Sometimes at the bottom of a specially made hillocks, but often it's just another way to hide the poor quality of the product.

How to choose the optimal size

Manon 003

The most important thing for a bath, so that it was comfortable.This design does not pick up as easy as it might seem at first glance.Prompt how to determine the size of the bath:

  1. height.The optimal value of this indicator is considered to be 650-700 millimeters.This will easily get into the bathroom and get out of it.
  2. depth.The optimal value - 500-600 millimeters.In the tub so deep you can keep your head above water without difficulty.
  3. length.Selection of this parameter is usually based on your growth.It should be enough to not have to sit with your knees bent.The average length value of from 1500 to 1800 mm.
  4. bathroom width can be any.The most important thing for you to feel comfortable.

Bath in cast marble

Installation - acrylic - liner - in - bath

This is one of the most expensive options, related to the class of luxury.The product is obtained by combining the marble chips and polyester resins.Of the merits is to provide the following:

  1. Their colors may vary.
  2. production technology allows us to look under any rock material stone.
  3. high degree of sound absorption.
  4. well withstand the vibration, so it is best suited for installation in their whirlpool systems.

Among the shortcomings can be identified as follows:

  1. big weight.
  2. complex installation.
  3. possible chipping.

Conclusion

acrylic bath - small

  1. If you are wondering what the best bath acrylic, steel or cast iron, it is worth paying attention to their hygiene and durability.Then, we can say that for better hygiene acrylic design, but cast iron still much stronger.
  2. If the choice stood between acrylic and steel bath, it is obvious that the first one will have a lower price.However, to restore the appearance of the surface scratches on the easiest of acrylic products.
  3. If you want to choose a cast-iron or steel bath, it can be said that the easier, of course, is the construction of steel, but in a cast-iron water will take longer to cool down.
  4. If there was a choice between the acrylic and cast iron products, it should be borne in mind that the first of them is stronger due to the greater flexibility.Iron, as is known, is a fairly brittle material.

somehow pick - acrylic - bath

How to choose a bath: Video