The clean, wash acrylic bathtub : tips and review cleaners

in the world today is very popular plumbing steel products from acrylic.For example, to replace the iron and steel baths came lighter and elegant acrylic bathtubs.That lasts as long as possible, it is necessary to clarify some of the subtleties and nuances about the care of her.The material from which such products are manufactured has a number of features that creates a number of advantages and disadvantages of acrylic bathtubs.One weakness is that the net can only be by special means.What can wash acrylic bathtub?

Depending on the method of manufacture of acrylic baths can be of two types:

1. Extruded - are produced by heating a polymer sheet to a certain temperature and give it the desired shape using a press.Such bath somewhat worse keep their shape and require additional processing or glass epoxy resin.Mounted on a metal frame;
2. Cast - in a special form of poured molten acrylic.The properties of such a bath is somewhat better than the previous one, but the price is naturally higher.For a better safety and treated with epoxy.But it can be installed directly on the legs, without the use of a skeleton, but you need to be sure that the product quality.

What caused such popularity of acrylic baths and how they differ from the iron?

• lightweight products - the average weight of acrylic baths - 20-25 kg.In this regard, it is easier to solve the problem of transport and installation;
• variety of forms and designs - acrylic baths allows you to create the most diverse, sometimes very unusual forms;
• high thermal insulation properties - the water temperature decreases significantly more slowly - only 1 degree every half hour;
• hygiene - are not subject to the defeat of mold and mildew;
• easy to clean - easy to clean, even with the use of simple improvised;
• not corrode - this is because the acrylic - a chemically inert material, and thus occurrence of rust excluded enamel will not be damaged;
• easy removal of small defects - small scratches can be removed using a felt.

Thus, unlike cast iron bathtubs, acrylic retains heat much longer.Another important difference - ease of care, and the exclusion of certain types of pollution.

In terms of the use of cleaning agents have many questions.Thus, the disadvantages of acrylic baths:

• low level of strength - any object has fallen into the bath can damage it, up to the formation of cracks and holes;
• fear of high temperatures - at high temperatures means more than 150 °, but if low-quality acrylic, it can be deformed and from the hot water from the tap;
• intolerance of certain cleaning products - requires special chemicals, you can not use scouring powder, asthey leave behind traces of scratches;
• small period - an average of polymeric baths are no more than 10-15 years.Usually, for this time of brewing the idea of ​​a new repair, so do not worry too much.

And not to spoil the acrylic bathtub cleaning agents need to know the specifics of caring for her.

cleaning To bath longer had an attractive appearance, it is important to follow a few rules:

in acrylic bath is not recommended to put heavy objects, especially metal - they may leave marks and scratches;

1. After each use, wash it with warm water and a soft sponge.
2. after each cleaning should be wiped dry with a bath.
3. Avoid contact with acrylic acetone, chlorine, ammonia.
4. Do not soak the clothes in the bathroom.
5. If you want to buy a pet - use the litter in order to protect the surface from the sharp claws of the animal.
6. Wash acrylic bathtub with chemicals can be a maximum of once every ten days, and aggressive detergents better not be excluded.

With regular maintenance problems with the removal of contaminants does not arise, because acrylic has excellent dirt-repellent properties.And that after the cleaning bath shone, it should be wiped with a soft cloth.

Among the best tools designed to clean the polymers can be distinguished: Acryl Star, Bass, Cif, Mellerud, Triton, Ravak, acrylic, acrylic Polish, Mr Chister, Pani Bath, San Klin,Tim Pros.

important point when cleaning acrylic baths: it is impossible to work on a dry surface, it can cause damage to the polymer.It is necessary to use warm water and a mild detergent.Remarkably suitable liquid soap, gel dishwashing and showering.Rub hard with a sponge or, God forbid, a metal brush is strictly prohibited.

What procedures for cleaning of acrylic bathtubs?

• , apply cleanser on the tub wall and the area of ​​visible contamination.
• Five minutes reserve "soak".
• Wash off with warm water and a soft sponge or cloth.
• If the dirt is left - repeat the procedure.
• wipe dry.

Nothing complicated to clean acrylic bath is not the main thing - to use the right detergent.

When the house is not suitable for chemical bath, you can use the means at hand. One of these is the wine vinegar.He copes with stains and rust.To clean the acrylic bathtub, it is necessary to moisten a cloth in vinegar and rub on the dirt spot, it can be washed off after a few minutes.Similarly, by the action of a diluted lemon juice or citric acid.

can also use ordinary soap or shower gel.For greater effect can be filled with warm water bath, diluted therein or soap gel and let it stand for a while.Once we get down the water and wash the bath, and then wipe with a dry cloth.

With this kind of pollution is not as easy to handle as with others.To effectively get rid of limescale without damaging the coating bath, it is necessary to resort to a simple but very effective way. This method is really very good, but it should not be used more than once a year.

1. Pour into the bath with warm water.
2. Pour vinegar bottle and mix.
3. After 10-12 hours to flush and wipe with a sponge bath.
4. to rinse and wipe.

The vinegar can add soda.

If you can not wait that amount of time, you can use special cleaners or diluted in a glass of citric acid is 1: 2.Then the sponge is applied to the solution of lime, waiting for about 10 minutes, then repeat the procedure and carefully begin to wipe lubricated place.After the rinse water.However, it is hardly the way to help, if the layer of stone is large enough.

Acrylic does not rust, but rust stains from flowing from the tap, are a serious threat to the bath. To avoid this problem, you can use all of the same citric acid.Treated this way the bath surface will remain snow-white throughout the week.The Clean grenade once a month as a preventive.

If yellowness does not disappear, then it is necessary to use special cleaners.

acrylic baths in this regard, there is no difficulty, because the resin is not exposed to fungal attack and mold. Yet from time to time it is necessary to disinfect, to protect themselves and their loved ones from dangerous bacteria.For this bath filled with a dilute disinfectant compatible with acrylics and leave for 10 minutes, this time is enough.After thoroughly rinse with water.Now, the microbes do not threaten your health.

Huge advantage of cast acrylic baths is the possibility of their restoration. If the surface is scratched, it can be eliminated by using the smallest sandpaper.And in order to restore its former luster polishing paste rub.

In the case of many small tsarapinok can apply felt.Suffice it to overwrite the damaged area of ​​this material, and a bath will again look like new.

Adhering to the basic rules for the care of acrylic baths, you can extend the battery life for years.The main thing - remember what can wash acrylic bathtub, as well as the regularity of cleaning, and then your bath will retain its shine and whiteness, and water treatments it will take only a pleasure!