How to choose decking for fence

Profiled intake: practicality

Cottagers and gardeners with at least twenty years of experience country life have come to realize the changes that have taken place in the minds of his fellow-citizens, who previously were close neighbors and good friends.In place of air, cherished wooden fences or practical grid "netting" came from the two-meter fences profiled metal sheets.Any Gardener's Association is now is a kind of prison zone with blind corridors, but this is a voluntary choice of gardeners.It is important for it to be reasonable.

At some point, the residents of country cottages residences in Russia completely lazy, we stopped planting beautiful hedges, and went on a fast to install and relatively cheap material (corrugated metal sheet), abbreviated as profiled.What he is is:

• thin metal sheet rolled (extruded) on special equipment;details discussed below;
  one goal: to give this specific profiled workpiece shape (trapezoidal, wavy, segment), which allows to withstand high lateral loads;
• large format sheets should not sag, deformed by external influences, be resistant to changes in climatic conditions;
• additional factor under certain requests of potential customers can be a product aesthetics and corrosion resistance.

It was developed for the corrugated board industry is quite utilitarian purposes, on fences in suburban towns it dragged our tireless "Kulibin".Fast trim trade pavilions, large shopping centers, construction of roofing and trapezoidal sheet were a prelude.When construction firms have become instantly equip fences on construction sites of these profiled materials, people instantly evaluated their prospects at the household level.

Specifications corrugated intake

Offer on the market of construction materials like rolls, so if you are not a professional engineer - builder, look for the following key indicators:

• specific gravity: ideally one quarter.meter corrugated board must weigh less than 7 kg;like sheets even for roofing can be used, and build a fence of them with their own hands - a sweet deal;
• load bearing structures;to assess the stability of the pillars and crossbeams your fence you can for yourself, but it is better at this stage of assembly to invite experts;when your fence will take an unexpected gust of wind will be very sad;
• choose from special profiled series (for example, N114-600 or N60-845 from the collection company Investsnabstroy) for the construction of suburban fences we recommend that you do not;it is not even the price of 304-451 rubles / sq m, and in a special profiling products for the roofing slabs of large buildings.;
• durability of corrugated board to the fence;It is determined only by the quality of the polymer coating (from UV protection, acid rain and other natural charms);some manufacturers give a guarantee of 15 years - do not believe, in our climate all rots and rusts more quickly;
• a polymer deposition on the steel sheet for your fence you choose (polyester, polyvinyl difluoride, plastisol, Pur or other), is not so important, the main thing that your wife liked the color.

However, there is another important aspect: the issue price.The material from which made the original profile of the sheet, the quality of the polymer deposition at times increase the cost of production.In this situation, the choice for the consumer: pay a little but often, once or for a quality product.

Building a fence made of profiled sheet: what to choose

If you decide to dissociate itself from its neighbors and all the surrounding deaf iron wall, try to do the job properly, or entrust the work of reliable performers.Find an offer similar services on the Internet is not difficult, much more difficult to determine the level of training and professionalism of employees and the quality of corrugated board for the fence that you bring.What should pay attention:

• clear fence line markings corresponding to the boundaries of your land;War of real estate in Russia have long been the norm;cadastral passport (copy) must be at hand;
• try to independently determine the desired length of lags fence of corrugated board;for you this particular design involved in the project, for suppliers sheets and builders - a technical specification for size range of finished products;
• fundamental basis for the future of the fence;fence posts should be buried at 1-1.5 meters;drilling, hammering, concrete - all on the conscience zaborostroiteley;the result in this case is obvious: the steel sheet does not fly away at the first strong gust of wind;
• horizontal alignment of the poles: the general line of the fence is calibrated every two with string tension: the upper boundary profiled sheets and set the reference segments;
• vertical linearity intake racks;the terrain is not always possible to draw a clear contour of the barrier and the fence of trapezoidal sheet accounts graphically break into sections;

Then everything is simple: to fasten vertical horizontal logs (edged board 40-50 mm), take sliced ​​the size of steel sheet, screwdriver and fasten with a second element to the first base.Screws for metal will be quite appropriate.

Building a fence made of profiled sheet: what to choose

If you decide to dissociate itself from its neighbors and all the surrounding deaf iron wall, try to do the job properly, or entrust the work of reliable performers.Find an offer similar services on the Internet is not difficult, much more difficult to determine the level of training and professionalism of employees and the quality of corrugated board for the fence that you bring.

What should pay attention:

• clear fence line markings corresponding to the boundaries of your land;War of real estate in Russia have long been the norm;cadastral passport (copy) must be at hand;
• try to independently determine the desired length of lags fence of corrugated board;for you this particular design involved in the project, for suppliers sheets and builders - a technical specification for size range of finished products;
• fundamental basis for the future of the fence;fence posts should be buried at 1-1.5 meters;drilling, hammering, concrete - all on the conscience zaborostroiteley;the result in this case is obvious: the steel sheet does not fly away at the first strong gust of wind;
• horizontal alignment of the poles: the general line of the fence is calibrated every two with string tension: the upper boundary profiled sheets and set the reference segments;
• vertical linearity intake racks;the terrain is not always possible to draw a clear contour of the barrier and the fence of trapezoidal sheet accounts graphically break into sections;

Then everything is simple: to fasten vertical horizontal logs (edged board 40-50 mm), take sliced ​​the size of steel sheet, screwdriver and fasten with a second element to the first base.Screws for metal will be quite appropriate.