Build Daily

Repair Video

August 12, 2017 18:08

Electricity video apartment

click fraud protection
Electricity in the apartment with his hands video, photo

wiring in an apartment with his hands

is believed that the average modern apartment consumes a power of about 8 kW.Hence, it is necessary to use a circuit breaker 40 amps.This is sufficient to protect against overloads and short-circuit current at.circuit breakers (eg RCD) are needed to protect people from electrical shocks, as well as in the races of the supply voltage.Most often installed 2 RCD, one - with a leakage current of 10 milliamps (bath), and the second - 30 mA (for the female group).To learn more about the proper installation and can be in the article about the RCD.

himself wire is selected based on the fact that the load on it shall not be higher than 8 A / mm square.For the female group is enough solid copper provoda1,27 mm in diameter.

should carefully consider the scheme wiring track to safely carry out wiring in the apartment, and video tips below will help in this.Please note that shtroblenie walls should be minimal, the course must not be crossed.Wiring is routed only to the horizontal and vertical straight lines.The apartments usually do hidden wiring located in Stroebe - 1.5 - 2 cm recess.Shtroblenie walls made of disk grinding machine.Use with the diamond cutting disc.Sockets for mounting and junction boxes punch puncher.Posting attached alabaster solution every 25 cm - 30 cm. Mounting nests also fixed alabaster.You can not save on the length of the wire - it should be enough to free all the necessary connections.Isolate the joints better shrink tubing or PVC tape.It is forbidden to directly connect wires of different metals - only through the terminal blocks.It is also not recommended to use twisted when connecting.Eventually, in the field twists the wire becomes brittle increased.It is best to apply the solder to the flux activity such as zinc chloride.

Instruments
Widget from SocialMart

All places of any of the wires are placed in the distribution boxes, without exception.Also, be aware that the latent wiring in the apartment, made with his own hands, or walking under the sheetrock, siding or clapboard, must lie in a protective sleeve.

Stroebe a socket or switch must not go above it.Installation boxes, plastic is better to take - they provide a tighter fit.Calculating the number of outlets - 1 socket 6 square meters of floor space.Switches and sockets are best placed at a height of 75 -80 cm. From the floor.

All work carried out on the dead network.Connecting machines to power only after checking the entire network.

wiring in an apartment with his hands video


See another video, "How to replace the sockets and switches."It will be useful to all who are faced with this and do not know how the wiring in an apartment attached video tips below.

https: //

https: //

https: //

https: //

instagram viewer