How to insulate the floor in a private house

floors Thermal insulation in a private home will help you to minimize heating costs.The amount and properties of the insulating material used to insulate floors in private homes, not only depends on the climate zone, but also on the design of the house.So, the house in which the structurally provided cellar may have more modest heat insulating layer.

Winterizing floor roll insulation materials

For warming the floor in a private house, you can use roll insulation material.

Besides thermal insulation properties of the material still retains good sound.It can serve as a good insulating layer.In addition, it is non-flammable, which is another definite plus.

To roll the insulating material accurately fits to your gender structure - it must be precisely cut.This material may be cut in the roll, which is also an advantage in use.

When the cutting roll insulated material do not forget to leave a five millimeters on each side in the mounting allowances.

advance sliced ​​insulating material is rolled between a wooden floor joists.

insulating floors using foamed polymers

Also, insulate the floor in a private house, you can, using sheets of polymer foam, for example Penoplex.

That's the way of the insulating sheet looks Penoplex 200 millimeters thick coated with a mounting adhesive layer.

recommended to use a special adhesive for insulating boards For fixing of plastic insulation boards.

Also, for additional fixation of plastic plates special plastic molds can be used.

Too frequent use of plastic molds for mounting plates is not permitted, as in this case, we can form an additional "cold bridges".

need to put the goods on the plastic plate adhered to the fixing time.In our case, this load will be evenly spread out over the surface of the plate bricks.

Clay fits also the place where you intend to glue the plate of foamed plastic.Apply the adhesive after mixing must be using a plastic spatula.

surface insulation of floors in a private house keramzit

In addition, floors in a private house and can be warmed using expanded clay.Expanded clay - it is a special stone, which is a good thermal insulator.

At the first stage floor insulation on the cleaned surface of the plastic film is laid.Its mission - to isolate the overlapping of vapor permeation.She laid her lap and the edges can be fixed with adhesive tape.

polyethylene film When laying the film make sure that its edge came at the wall higher than the level of your future sex.

Attach the edges paroizoliruyuschey film on the wall of a damping or ordinary tape.

Then install the floor beacons - pieces of metal profile, which will indicate the desired level of your future floor.

metal profile is fixed to the floor surface using self-tapping screws in the dowels.

Expanded clay - this is an artificial porous filler for forming the lightweight concrete.Due to the presence in its structure since the air - it has excellent insulating properties.Kermazita grain size is from 5 to 40 millimeters.He fired in a special rotary kilns.

Expanded clay is widely used for insulation of floors and basements in private homes.It is also used for thermal insulation of intermediate floors, attics and roofs.

Expanded clay is poured onto the floor and then leveled on beacons long rule.

Keep expanded clay backfill in direction away from the wall to the doorways of the room.

Video - insulation of the floor in a private house