Build Daily

Do It Yourself!

August 12, 2017 18:05

How to make clips for reinforcement with his hands - materials and operating procedure

click fraud protection

sale found several types of clamps for reinforcement - "triangles", "chairs" and several others.Price products at retail for about 80 - 90 rubles.But how to get out of the situation if they are not at the right time (for example, not enough)?Or, the estimated amount of catches is such that it is cheaper to make their own hands?From what and how - the theme of this article.

Anyone who is interested in an independent manufacturer of clamps, to explain what it is, it is not necessary.

f- 1

But perhaps not everyone knows (and someone forgot) that the configuration of the embedded parts is chosen depending on where in the plane is made of concrete pouring of the solution, so it is worth mentioning the most common variety of clamps.

  • horizontally oriented formwork.In such cases it is advisable to use a support device for fittings "rack" type "chair" and their modifications.
  • vertical shading."Asterisk" is applied to such structures.

Basic requirements for Accessory Fixtures

Without knowing this does not make sense to engage in an independent manufacturer of clamps, if only because that does not get to choose the source material correctly.





  • Increased strength.
  • absolutely identical in size.
  • inertness to fluids and aggressive chemical / compounds, low temperatures and its spikes.

From what we can to make catches with his hands

From scraps of pipe clamp

looks so:

From bar

This arrangement in the building called "frog".On the feasibility of its application instead of clamps disputes do not cease, but many experts agree that it is often more effective in the private house building.

Basically, these parts are used for laying the upper row in the rebars.But if the foundation tape melkozaglublennaya and after the concrete load capacity is relatively small it is assumed that, as an option, is suitable.

F- 12

from bars and metal rings

In fact, this kind of "frog".The ring is filled with a solution and build into detail in the form of "U" letter.

should not blindly navigate to the material from which made the reference details of the industrial production.This is mainly plastic, but not all, and a special, which meets all the requirements listed above.Is it possible to independently determine all the properties of plastics available at your fingertips?

From what not to do clips

Wood and products based on it.Various pegs, "Chopik" pieces of plywood, particle board is not recommended for installation under the valve.Two main reasons - low strength and intense absorption of moisture.

f- h

Trim plastic bottles and the like.When loading the concrete mass such support simply flatten.

Brick.The explanation is simple - absorbs liquid and is gradually destroyed.

F- 8

Useful tips

  • The optimal placement of clips on the principle of a chessboard, with an interval of 0.5 - 0.9 m, depending on the characteristics of the frame (dimensions, cross-section of the bar).
  • If the strip foundation is not the so-called "footing", the minimum height of the lower clamps - 70 mm.
  • To set the self-made support for the sidewalls tape, can be used instead embedded boards.After leveling valves they are removed from the molds.

instagram viewer