Build Daily

Decoration Of Premises, Renovation Of Apartments

August 12, 2017 18:07

What and how to paint ceiling tiles

Exterior view of the ceiling is of great importance in the overall interior design.The ceiling must be an integral part of it.To finish the ceiling tile is often used, which, in turn, will require paint to refresh its appearance a few years.This job requires certain skills and knowledge, which we describe in this article.

Content

  • Benefits of ceiling tiles
  • How to choose a ceiling tile
  • What can paint the ceiling tile
    • Acrylic
    • latex paint
    • Latex paint
  • How to paint the ceiling tile

Benefits of ceiling tiles

a37ffd5s1783bf4123ayafs8a968e801ts

  1. At sufficiently low cost range is quite rich.You can pick up the tiles for an apartment or house almost any design.
  2. Ceiling tiles has excellent detergent properties.Therefore it can be safely cleaned during wet cleaning and vacuuming.
  3. This is a fairly durable material.On average, it can last up to ten years.
  4. Sustainability.
  5. High quality, sufficient strength.
  6. There is a possibility to choose any color scheme.

In considering whether it is possible to paint the ceiling tile, you should know that only suitable for painting products from foam, but the laminate and plastic should not be painted.

If you decide the question of painting the ceiling tiles, should know that the staining can damage the material, bad lie (to take bubbles) and leave streaks.If the tiles will be spoiled, then it will have to change.Though partially.

How to choose a ceiling tile

wrapping - ceiling tiles

ceiling tiles today are made of different materials.If you want to create a good sound insulation of the ceiling, then, for this purpose, you can use fiberglass products, mixed with starch.Furthermore, the foam is applied, wood, various lightweight metals.The most expensive are made of metal plates, so they use a small demand.The most common use of foam products because of their low cost and availability in the stores of a large selection of patterns.The appearance of such tiles can mimic marble, wood, metal and a variety of color schemes.

following types of ceiling tiles.

According to the principle of manufacture:

  1. Extrusions.It is produced by the method of stamping.The basis for the manufacture of products of this type are the blocks of foam.
  2. Injection.When making this tile is used by high-temperature sintering of foam polystyrene material.The result is a tile thickness of 8-14 mm with a deep and clear pattern.In this case the blocks have a regular geometric shape.
  3. extruded.For the manufacture of the blank used to form the extruded polystyrene strips obtained compression method.This strip may be covered with foil.Sometimes it dyed.

Surface type:

  1. laminated.It is equipped with a special coating, called lamination.This allows the tile to have a different color scheme, be resistant to moisture and to preserve the brightness longer.
  2. Seamless.This type of tile is perhaps the most convenient and simple.It differs completely smooth edges without ringing.In addition, after the bonding area docking plates to each other virtually invisible.
  3. Mirror.It is made of plastic with the application on the front side of the reflecting layer.Such material may be square and rectangular.With this tile can be visually increase the space in the room.

Selection Rules:

  1. Figure relief or products should be clear and no indentation.
  2. When selecting tiles it is necessary to take into account the geometric dimensions.Note that the product was a square shape and the same angles and straight lines.The material must have smooth edges.In addition, you need to pay attention to the fact that the corners were not jammed, twisted, or rounded.Otherwise, due to such gaps can appear tiles after installation.More
  3. consider the density of the material.If this foam, the grain size should be the same.The edges of the quality tiles at the same time do not crumble and does not crumble.The density of the material should be uniform.

What can paint the ceiling tile

For staining the ceiling tile is commonly used three kinds of paint - it is latex, acrylic and latex.They dry quickly and keep their appearance.Other types of paints is not recommended to use.Some, trying to save, ceiling tile paint with oil paint or enamel.But they are harmful to health.It is therefore worth some time to think whether you can paint the ceiling tile before her brother.

Everyone decides for themselves which of these three types of paint to use and how to paint ceiling tiles, but in any case it is necessary to focus on the best characteristics.

Acrylic

Paint - ceiling - tiles

often choose acrylic paint.And it is no coincidence.After all, it has the following advantages:

  1. reliability.Good density.
  2. Bright shades.Saturated colors can update any room.
  3. fits well and dries quickly, which will speed up the repair.
  4. Fairly good resistance to various adverse conditions.
  5. elasticity, allowing the paint to impose without bumps and divorces.
  6. resistance to various microorganisms.
  7. Sustainability, safety for humans.
  8. Water vapor permeability.
  9. When applying no strong odor.
  10. rich assortment.
  11. moderate gloss.
  12. Moisture.

Disadvantages:

  1. high cost.
  2. starts to wear off after the expiration of operation.
  3. low level of water vapor permeability.
  4. instability to swelling, peeling and flaking.

During tiles painted with acrylic paint for the ceiling create a uniform, smooth and dense layer, which is not afraid of no moisture or dust.Further, this paint layer has good resistance to different temperature regimes.

latex paint

water-based inks - 3_1

It has the following advantages:

  1. Satisfactory working properties.
  2. rich assortment.
  3. good density.
  4. moderate gloss.
  5. Moisture.
  6. resistance to various microorganisms.
  7. high level of water vapor permeability.
  8. Low cost.
  9. availability.
  10. harmless to humans and environmentally friendly.
  11. non-toxic and non-flammable.

Disadvantages:

  1. quickly absorbs dirt.
  2. smaller resistance to moisture than the acrylic.

Latex paint

Another type of paint, which has the following advantages:

  1. dries fast.
  2. Suitable for any type of surface.
  3. When applying undertakes bubbles.
  4. not tarnish.Long enough retains the original color and luster.
  5. can paint the surface of various types - wet and dry.

Disadvantages:

  1. If applied too thick, it is possible to peel.
  2. in rooms with high humidity is likely mold.

All kinds of materials described above, already tested by time, but everyone decides for themselves what paint to paint the ceiling tile.

How to paint the ceiling tile

ceiling - tile - 3

Before painting the tiles should take care to protect the floor and walls of the ink droplets.If possible, fully vacate the premises.If something of the interior to make it does not turn, cover at least the newspapers.

In addition, you need to take care of work clothes with eye protection and head.

Paint - potolka.zhpg

When preparatory work is finished, you can start finishing.The order of carrying out the following:

  1. Prepare putty and paint over it tile joints.It is necessary to lay down paint on the tiles evenly.
  2. Prepare the paint for the ceiling tiles.To obtain the desired shade of color dyes may be mixed and then applied them to the ceiling tile.To create a rough and uneven texture can be added to the paint a little sand.
  3. If laminated tiles, it should be cleaned before painting it.This is to ensure that the paint is not curled up in clumps.
  4. To paint you need to take a roll, dip it in paint.Now go directly to work on the stain.You can start from any angle, but the work did not bring to the wall edge.
  5. Near the walls remain gaps.They are careful not to stain the wallpaper, paint with a small brush.
  6. Generally, you need to pre-calculate the amount of paint needed.If this is done correctly, the result of work on the ceiling will not be uncolored or weakly colored seats.Thus, the more you can eliminate the occurrence of further stains on material, and clumps of divorce.
  7. To get a good result, it is recommended to walk painted 2-3 times.This will help to consolidate the knowledge and skills on how to paint the ceiling tile.The photo below shows the final result.
  8. ceiling tiles with patterns, designs, patterns or textured roller or a brush is not to paint quickly.Therefore, these products are best to paint a special spray.At the same time we must try not to get on the jet walls.Such stains from the wallpaper does not withdraw.Therefore, the edge of the wall material is better to paint by hand.

adhesive - ceiling - his - hands - colored tiles

painting ceiling tiles: Video

How to paint the ceiling tile: Video

instagram viewer