How to lay linoleum on the wooden floor : three ways

Preparation for laying linoleum floor

If the wood floor in the normal state, especially to prepare it for laying is not necessary.The entire process is carried out in several steps and will not require any special effort or special tools.In particular, the need to implement:

• additional hardware boards (planks);
• sweep mounds sander and irregularities (if any);
• camouflage caps screws and nails: they first need to "drown" in the tree, and then zashpatlevat;
• putty cracks, chips and joints between the boards (large gaps in the pre-scoring narrow strips);
• final polishing surface.

If carried desire to spend as much time on the preparatory stage or height boards difference is very noticeable, we recommend simply clean off mounds plane and put on top of a solid sheet of plywood boards.It is an ideal base to lay linoleum on the wooden floor.

Conditions for successful installation

cover air temperature in the room where The installation is scheduled for two days should be warm and stable.In particular, the base must not cool down more than 15 degrees Celsius and the air is better to let it be warmer - from 18 and above.An important role is also played by humidity.It must meet 40-60 percent.

methods of laying linoleum on the wooden base

technique involves mounting the admissibility of three ways:

• without bonding;
• fixed on the double sided tape;
• adhesive.

Each type of installation has its pros and cons, and also has an army of fans.Let us consider more impartial opinion of experts on this subject.

Glueless method

easiest, but not a reliable way - carefully aligned covering just pressed and thereby fixed on the perimeter using the baseboards.Suitable only for small rooms.To do this:

• linoleum is marked and cut with a margin of 5 cm from each side, and is cut exactly in the shape of the room only after otlezhus in the room;
• surface is smoothed by one of the walls, then there is a plinth fixed;
• for each additional wall covering is stretched so that there was no waves or gaps between the skirting and linoleum.

fixed on the double sided tape

great option to fix the linoleum on the wooden floor without too much hassle, but reliably.Duct tape is located along the perimeter of the room and the grid with a side of about half a meter square.The main thing is that the upper side of the adhesive remained veiled protective paper to cover the direct mounting.When laying the protective tape rented slowly meter by meter.

adhesive laying

is the most common option, due to the balance of practicality, efficiency and reliability.For a large room and did the only correct way.

According steps:

• mark up the material as well as for glueless method;
• fabric folded in half to protect the front side of the damage and open the work surface;
• on the edge of the fold (certainly incomplete), draw a pencil line;
• Apply glue to the base (floor) notched trowel;
• Wait till the time indicated in the glue instructions;
• laid some of the material onto the prepared wooden floor;
• immediately smoothes the surface by air bubbles and creases, first manually and then by means of first roller in the longitudinal and transverse directions after;
• so did the second half of the leaf;
• if you intend to blow a few sheets in the room, then to the rest of the work carried out in the same way, and the flooring is overlapping;
• seams carefully exempted from speaking adhesive and pressed down the board, and on top of the load prior to final drying glue.

In principle, this is quite enough for normal use the flooring, but the final isolation and does not hurt.Seams can "cook" hot or cold way that will allow them to perfectly serve longer.Hot gives slightly better results, but require special skills and equipment, so the life mainly applied cold.

Conclusion

Lay the linoleum on the wooden floor is absolutely simple.It is the perfect combination of materials - warm and practical.However, that the result has pleased, and served as a cover for a long time, the floor must be perfectly flat, and surface preparation plays an important role eventually.