Eliminate the blockage in the toilet means at hand - quickly and easily

all blockages in the toilet caused by two main reasons.The first - in the pipeline and got stuck there "something big."One example is when, after bathing in the toilet floor with dirty water "floats" and a doormat.Incidentally, there is not so rare.The second reason - the reduction of the diameter of the sewer pipe.This is a natural process that happens constantly.On the inner walls of the various layers are deposited, which hinder the passage of what goes into the toilet.That is to say, the theory.Now practice - how to remove the blockage in the toilet?

Define obstruction

The first thing to determine is held still water or "channel" of its passage packed "tightly."To do this, the toilet drain some water.Just do not need to do this with the help of the toilet tank.If the tank began to "wash away" the water, it can not be stopped.And it may be that half of the water along with the dirt from the toilet is on the floor of the toilet room.Pleasant, of course, is not enough.It is necessary to fill the water bucket or pan and slowly pour it - then once it becomes clear, it passes or not.

In addition, you need to see if the water coming out of the bathroom, the sink in the kitchen.If all the water "out" OK, that means - it is packed with the portion that connects the toilet with a public sewage pipe.If does not pass, the case therein a common tube.In this case, you can try to use improvised means - plunger.Such an arrangement is in every house.It is more convenient to work in the bathroom.Pre-need to tightly block the hole in the sink overflow hole in the bath itself and tightly close the lid of the toilet, putting even something heavy on top.Sometimes this method helps to break through the blockage site.

assume that the situation is - the water in the bathroom leaves (clogged toilet is).If the water is still coming slowly, you can try to remove the blockage using any chemical compound, which is in the house.The most common in housewives have in stock special means "mole" or something like that.You can use vinegar and baking soda.After the required time has expired, you need to throw the toilet necessarily hot water.Moreover, the water should be drained slowly, parts.Hot water promotes softening of the substance, which formed a jam (if it's not a rag, of course).

This should be done several times.Perhaps in this way it will be able to gradually promote the "stopper" to the public sewage pipe.And since it has a larger diameter, is then this "plug" just go away by the pipe system.This work takes time, but it's worth it.

Robust

But still the most reliable tool to clean all pipes - is a special cable for use exclusively with plumbing fixtures.Unfortunately, in the sale, he somehow rare.If not in the apartment, and you can ask the neighbors.To hesitate is no point.One should take into account that this is quite flexible cable.It is specially made so as to "climb" in the most inaccessible places.

drain pipe, which extends from the toilet, has a certain configuration - it has a bend.This is done so that in these places all the time the water was.It prevents the penetration of different smells in the room of the sewage system.Therefore, using a cable, it must be all the time to rotate.Otherwise, he will be rested and will start depreciating, and then through the pipe will not work.

Before "active" actions, you need to check the very beginning of the drain in the toilet.You can put on a rubber glove on his hand or make a wire hook.Maybe in the beginning of the "channel" really stuck a sponge, rag, which is easy to pull out - that's the solution.And the most extreme case - to liberate the toilet and check the junction with the outlet nozzle, but this is rare.