Terms of care for floorboard lacquered - everything you need to know

durability of any product depends on its proper, accurate and timely service operation in the intended volume.With regard to the floorboard with lacquer, it requires special care, as its structure has a number of features, which need to be considered.And first of all, multi-layered.

Quite often, the concept of "block parquet" and "flooring" in everyday substitute for each other, hence there is some confusion.It is necessary to draw the reader's attention, it's not the same thing.Classic parquet flooring - a piece of solid wood, which has a strict geometry, and treated in a special way.Board the same - a composite product, as a rule, of 3 layers bonded with an adhesive composition of the special scheme.And the tree species in each is different.Detail all the nuances of the selection of wood flooring are described in this article.

to floor retains its original appearance and kept operational life guaranteed by the manufacturer, it is necessary to observe a number of rules which is elaborate.As a general rule, this implies a banal timely cleaning, although the concept of "care", when you think, is somewhat broader.

Care to

installation Care floorboard does not start after the installation of the place, but immediately after its purchase.Unfortunately, on this and many do not realize.It often happens that the owner proceeds to repair (finishing) works after a while.We must not forget that any wood does not like rapid changes in temperature and humidity.That is why you need to ensure the most favorable conditions for the temporary storage of products.

• boards are stored only in the package.If the factory "packaging" is damaged, it is necessary to eliminate the defect.
• The room should be well ventilated, it is necessary to maintain the temperature within 22 ° C.The maximum deviation from the set value (including, and every day) less than ± 4 ° C.Regarding humidity, its optimum rate - 55% (± 10).

undesirable to deal with transportation, loading / unloading goods in rainy, wet weather.

During

installation begin work only under the condition that the premises to establish a permanent climate, without sharp jumps in humidity or temperature.Therefore, laying floorboard in late autumn, before the start of the heating season, it is not recommended.

During operation

necessary to take care of the maintenance of an appropriate climate.You may have to purchase and install any HVAC equipment.Thus it is necessary to take into account the features of some devices, especially for heating.For example, the reflectors air dried, and reduced moisture content is not the best impact on the floorboard.

If you walk on the "finishing" coating can have about 24 hours, furnished a little differently.By its placement, it is desirable to start only 10 days later (this applies to boards, which are covered with lacquer after installation or repair associated with polishing and updating the front part), that is after full hardening of the applied composition.

can not walk around the room where laid parquet, in the "street" shoes.Or at home, padded or barefoot (to the question of wearability cover!).

Given that the basis of wood flooring wood use in the process of cleaning detergent cleaner can not.Only conventional models, designed only to collect dust.

allowed periodic wet cleaning, but only on condition that the cloth is dry enough, and the formation of even small puddles on the floor is possible.

Removing stains appeared special means permitted only in cases where they are "compatible" with varnish.Otherwise, do not avoid divorce, "bald spots" and so on.From this viewpoint banned various solvents including alcohol-based compounds, benzine.

are commercially available so-called "cleaners".This cleaning compositions which are absolutely inert in relation to the varnish.If the board from a reputable manufacturer and not a fake, then the accompanying documentation is required to have a list of recommended resources for the care of the samples.

pet lovers should take care of the additional protection board, otherwise it will be pretty fast grid of tiny scratches from claws.For this purpose tools that are analogous lacquers (only more liquid consistency) or special polishing wax-based.

Buying floorboard particular manufacturer, you need to familiarize yourself with all the features of care just for this type of product.Assortment of different sprays, polishes, "fresheners" so big that enumerate all makes no sense.The more so because it is "your" means for each sample.